0
\$\begingroup\$

I am shooting with Canon 7D Mark II and I am currently trying to get into the flash photography. I am still working on a budget so I started with two Yongnuo YN-560IVs and a YN-560-TX transmitter.

I am shooting lots of sports and the first time trying these flashes I realized that my flashes won't fire when I place them farther away. I need the flashes to fire from 15m-20m. And I need triggers that can fire my flash even it's placed behind some subject.

I am thinking about buying wireless triggers, but I am not sure which ones to choose. I was looking at the Yongnuo YN-622C TTL, but read elsewhere that it's not compatible with my 7D Mark II. I am not sure what to look for to get triggers that will work with what I have that will do what I need.

Also I'm not sure if I can use my YN-560-TX controller to communicate with transceivers or do I need to buy a wireless flash controller instead (mine says manual)?

\$\endgroup\$
2
  • 1
    \$\begingroup\$ Welcome to Photo.SE! We tend to avoid product recommendation questions here as they become outdated quickly and are often too specific to help other readers. Sites like Amazon and B&H Photo are usually good sources of information to help with your purchasing decision. \$\endgroup\$
    – Caleb
    Commented Sep 13, 2016 at 19:49
  • \$\begingroup\$ The YN-622C system is fully compatible with the 7D Mark II. Just remember that it is a radio control system. Prior to the RT series of flashes Canon's own wireless E-TTL control system was optical and the cameras with built-in flash retain the ability to control those older flashes optically. But that is true of all of the Canon cameras/flashes. To use any Canon optically controlled flash with a radio controller the flash needs a radio receiver - whether an external one or an internal one such as your YN-560IVs have built into them. But not all radio systems speak the same language. \$\endgroup\$
    – Michael C
    Commented Sep 13, 2016 at 22:45

1 Answer 1

2
\$\begingroup\$

I am not sure what to look for to get triggers that will work with what I have that will do what I need.

The gear you have should already do everything you need. The YN-560-TX specs out to a 100m range; and anecdotally there are folks getting 200m range out of it. The YN-560 triggering system is also radio-based, so it should not have any line-of-sight issues.

Also I'm not sure if I can use my YN-560-TX controller to communicate with transceivers or do I need to buy a wireless flash controller instead (mine says manual)?

And even though it's manual-only you can still control the power level and zoom settings on your remote lights from the TX. And the YN-560 IVs have built-in transceivers, so you don't need them as long as you're using the YN-560-TX or an RF-603/603II/605 as your transmitter. If you switch to the 622 system, however, you will need to add YN-622s to each flash.

But I don't think you need new triggers. You haven't mentioned requiring HSS or TTL (which would be the main reason to move to the 622s, although the Godox X1 might be a better bet for future expansion). What's more likely is that something's incorrectly configured in your setup.

  • Did you check your flashes were firing correctly without the triggers (good batteries, in working order; use the test button).

  • Are the batteries in the TX unit good?

  • Is everything on the same channel?

  • Are your YN-560IVs in radio slave mode? (not radio master, not optical slave)

  • Did everything work at closer distances?

  • Is the transmitter seated properly on the hotshoe of the camera?

  • Have you checked all pins/hotshoe contacts are clean on the flashes, camera, and triggers?

  • Are you getting the blue light indicating the trigger is paired?

  • Is there radio interference in the area where you want to shoot? Did you try different channels?

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.