4
\$\begingroup\$

Been using my D3 for years now. On Thursday night, I was shooting some product inventory for a local business and when I went to review a few of my first photos, noticed that I was scrolling through each photo twice. I've got two memory cards in my D3, and the second card is set to Backup mode. But all of a sudden, playback is showing me each picture from each card. Something it has never done before.

Additionally, Deleting a photo is working exactly the same way. Whereas deleting a photo prior to Thursday night would delete it off of both cards, now it's deleting off of only 1 card, forcing me to delete each photo twice.

I've not updated any firmware or fundamentally changed anything about my hardware, and I didn't change anything deliberately in my settings (clearly I must have, but it must have been accidental). I've spent the last 45 minutes going through the D3 manual, looking online, and working my way through the D3s menus and I can't find an answer to this.

Anyone have any ideas?

\$\endgroup\$

1 Answer 1

2
\$\begingroup\$

Double check that you're still set to Backup in your card setup...

Reformat both memory cards...

When you're in Playback I think there is a different menu. Check the Playback Folder setting- the default is NCD3S but if it's set to something else it may be causing what you're seeing.

If all else fails, you can do a Two Button Reset and start over from scratch... Save your settings so you can reload them after the reset, but see if the reset fixes the problem first.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.