Many DSLRs have a "fine focus adjustment" option, stored in the camera per lens.

Why is it that some lenses need this?

Why do some lenses not project a focused image onto the sensor when the camera body has adjusted it to a point where it believes focus is correct?

I assume this is a side effect of NOT using the sensor itself to confirm focus, using the phase detection array instead...


2 Answers 2


Lenses and cameras are real objects and have manufacturing tolerances which are generally good, but you'll almost never end up with a lens or camera whose specs precisely match the design. No two lenses and camera will be absolutely identical.

A lot of the time (most of the time) these differences are too small to worry about in practical shooting (even professionally).

But sometimes you get e.g. lens and/or camera (or more typically the combination) have tolerances which mean the result is just too far outside what you need for that perfect shot.

So to compensate you can set microfocus adjustment.

There are a lot of complications to doing that properly and, IMO, most people who use it have no idea what they're doing. Just to diagnose the problem properly you have to be certain your technique doing the formal testing is spot on. I've seen a lot of amateurs make things worse trying to correct focus issues which are really general technique related and not this issue I've described.

  • Thank you for taking the time to put together an answer - However you appear to have completely missed the whole premise of the question. Aug 2, 2017 at 7:11
  • 1
    What premise ? As far as I can tell I answered your question. Aug 2, 2017 at 8:03
  • The question is asking why the CAMERA BODY confirms focus (via Phase detection) yet the projected image isn't focused on the sensor. That is the question, and your answer does not address this. Aug 2, 2017 at 8:18
  • 2
    You should amend your question, because that's not an interpretation I think most people would get from your existing question. Aug 2, 2017 at 8:22

Fine focus exists because sometimes autofocus does not work as intended.

DSLR use the image reflected on the mirror to focus, usually the difference between this and the image projected on the sensor is negligible but there are cases when it is not.

This flaw is only observable on wide apertures when the depth of field is shallow. Although there are extreme cases when this is observable even on narrower apertures. Sometimes using live view can help with this issue.

I don't know exactly why is is that some lenses behave differently than others, it is most probably manufacture problems. Still the culprit of back or front focus is mostly a body not a lens.

Fine focus allows you to compensate for these small flaws.

  • Why do you believe that front/back focus is a body problem when Roger Cicala believes otherwise?
    – Philip Kendall
    Aug 2, 2017 at 8:36
  • Have you actually read that article?
    – dannemp
    Aug 2, 2017 at 8:36
  • 1
    Yes, many times. The point is that front/back focusing is due to the combination of the body and the lens, not just the body.
    – Philip Kendall
    Aug 2, 2017 at 8:42
  • When the body focuses it will move the focus of the lens until it reaches what is said to be the best position. The best position is determined in different ways, most common being the use of phase detection. If a lens is lower quality the flaw of the body will be more evident, but it is still mostly the flaw of the body that influences it. This is why fine focus can be done for different lenses differently, to adjust to the quality of the lens, not to the back/front focus of the lens.
    – dannemp
    Aug 2, 2017 at 8:49
  • It is possible that a flaw in the lens causes it to not transmit its position correctly, such as the body commands a 1 unit move, the lens moves 1.5 units but still transmits 1 unit. You can't call this a front/back focus of the lens. It is still the body that focuses.
    – dannemp
    Aug 2, 2017 at 8:52

Not the answer you're looking for? Browse other questions tagged or ask your own question.