Hot answers tagged

3

The anti-glare coating on the Dell U2711 is indeed problematic. Anti-glare coatings are used on a lot of screens, the majority of them in fact. Most professional grade monitors intended for high-end graphics use, such as for photographic editing, video editing, etc. usually have an anti-glare coating of some kind, although a few are glossy (no anti-glare/...


3

It's hard to say what the 'Standard' setting is supposed to do on each particular monitor. From my experience with similar monitors, where there are 'actually standard' presets like sRGB or AdobeRGB and then some others, the Default or Standard preset can be one of two things: The 'native' display, without any built-in corrections. The 'best looking' ...


2

I have tested the ColorMunki and currently use the i1Pro2 to calibrate my displays. ColorMunki is a good cheap solution that works well. If your going to be ultra critical in your color workflow be aware it's not just about building a profile. The real issue with displays is the fact that monitors are not prints, and have very different spectral ...


1

I just ordered the 2515 and I will be able to answer that to you when it is shipped. I have the 2412m and it is one of the worst monitor without a doubt. It is extremely unpleasant to look at because the coating increases the area of the reflection of small light sources and makes a part of the screen completely invisible (lost in light). If I have the ...


1

I use the X-Rite i1 Display 2, which has been replaced with the i1 Display Pro. it has worked very well for me on laptop, crt, and LCD screens. Even though it is older, it still works on my Win 8 machines.


Only top voted, non community-wiki answers of a minimum length are eligible