Questions tagged [yongnuo]

YongNuo Photographic Equipment is a chinese manufacturer of camera accessories

Filter by
Sorted by
Tagged with
1
vote
1answer
55 views

Yongnuo YN720: Can I use master and slave without a trigger attached?

I bought two flash YN720 with the understanding that I didn't need a trigger to fire both master and slave flashes. Not sure how to set them up? I have two RF 630N triggers but I would rather not use ...
0
votes
0answers
22 views

Will Yongnuo 622C TX transmitter work with Neewer Vision 5?

Will Yongnuo 622C TX transmitter work with Neewer Vision 5? I have a Canon MarkDIII, a Canon Flash 580 EX ii, several YN 568 EXII flashes, several YN622C Receivers, and 2 YN622C TX transmitters; I am ...
0
votes
2answers
24 views

Is a Yongnuo YN-560 II flash suitable for use with a Nikon D3500?

Anyone know if the Yongnuo YN-560 II Speedlight Flash is suitable for use with a Nikon D3500 been offered on at a good price
1
vote
1answer
27 views

Can I trigger the Yongnuo YN-600EX RT Il with the YN-622C?

I own a YN656EXIII that I trigger with a YN622C. I'm interested in adding two YN-600EX RT II to my kit. I was expecting to be able to use the following setup: One YN622C on my camera. One YN622c on ...
2
votes
1answer
524 views

Why are there no blinking red lights in slave mode with one of my Yongnuo flashes?

I recently bought two Yongnuo 568 EX IIs and they're working great! I'm just having one problem in one of the two: when I put the flash in any of the slave modes (Sc, Sn, S1 or S2), the red lights do ...
1
vote
1answer
85 views

Unable to trigger my Speedlite YN565EXIII via optical trigger using a Canon 750D (Rebel T6i)

I own a Rebel T6i and a apeedlite, a Yongnuo YN-565EX III. I've tried several times to trigger the flash off-camera (on a tripod with a softbox) and I've had some very unsatisfactory results. With ...
2
votes
3answers
567 views

What Yongnuo controller will let me use my YN-568EX II with TTL and HSS?

I have two Yongnuo YN-568EX-II speedlites. I can use them as radio/receivers between the two, but I want to use a controller on camera to be able to use the speedlights off camera without losing E-TTL ...
1
vote
1answer
200 views

Why did my Yongnuo YN685 speedlight stop working after firing it off camera?

In the middle of a shoot, I had the idea of doing some off-camera flash pictures. This is the gear I used: camera: Nikon D7100 speedlight: Yongnuo YN685 radio trigger: Yongnuo YN622 TX-N I realized ...
3
votes
3answers
462 views

Can a Yongnuo 565EX (no HSS) be used as a second flash (slave) with another flash that has HSS?

I do know my question confuses and I do apologize for that. As a beginner, I still struggle to articulate things in a nice way. So I think it's better to explain the scenario first. I was using a ...
1
vote
3answers
90 views

3 Yongnuo 685n speedlights. Creative solution 1 on camera and 2 on light stands

New to photography and looking to use the yn685n on my Nikon D810. I am looking to use 3 yn685n but would love to have one on camera and 2 on lightstands. I have the 622n-tx and understand that it ...
0
votes
1answer
186 views

Connecting Yongnuo YN968EX-RT speedlight with a YN560IV off-camera

I just starting using speedlights recently and to be honest it's very overwhelming. I have watched countless videos but I still do not have an answer, I was hoping someone here can explain it to me. ...
2
votes
2answers
621 views

Universal wireless radio transmitter that can trigger Elinchrom studio strobes, Yongnuo speedlites and Godox flash

I have a pair of Elinchrom D-Lite-2 IT 200Ws studio strobes. The strobes have built-In Skyport wireless receivers and the set came with a Elinchrom Skyport ECO transmitter. This transmitter broke ...
0
votes
1answer
68 views

Is the Yongnuo YN968EX-RT compatible with a Panasonic Lumix Gx85 camera?

My first question ever. I am considering buying the Panasonic Lumix GX85 and would like to know if I can use my Yongnuo YN968 EX-RT flash with it. Are they compatible? Will I get TTL with this combo?...
0
votes
2answers
60 views

Yongnuo YN560-TX II

I watched a Kelby One lesson and per course purchased a Yongnuo YN560-TX manual controller to trigger my Nikon SB900 off camera with a softbox. Do I need to purchase something else to make this work (...
1
vote
1answer
58 views

How do I get a Yongnuo YN-685 to wirelessly fire in MULTI with the YN622N-TX?

I would like to use this setup so that two flashes both fire multiple times until the shutter closes. I can get the flashes to do this individually when attached to the camera, and I can get both to ...
2
votes
3answers
121 views

Yongnuo Updated YN600EX-RT II Flash not linking with Canon 77D

I think I've done everything in the manual and instructional videos I've watched, but I can't seem to get my new Yongnuo YN600EX-RT II flash to link up with my Canon 77D using the Easy Wireless setup. ...
1
vote
1answer
90 views

Is a Yongnuo YN600EX-RT II speedlight overkill for real estate lighting?

I have a typical newbie question. I've done HDR for a couple of years now and I see its limitations, so I'm ready to start using flash. I do real estate photography with the Canon EF-S 10-18mm lens ...
1
vote
4answers
6k views

What is the difference between this wireless flash trigger and wireless flash controller?

I am trying to work out what I need to trigger my flashes, which are Yongnuo YN-565EX (Nikon). I have found two options, but I am not sure if I need both. One is a "wireless flash controller" (...
1
vote
0answers
30 views

Yongnuo 85 mm on supposedly-cheap-and-good ef - nex adapter like commlite or viltrox iv

Is it combo usable, I mean the lens aperture is not dead and focuses accurately on sony a7 i?
0
votes
1answer
24 views

Can one YN600EX-RT II act as a transmitter only for another YN600EX-RT II?

Can a Yongnuo flash YN600EX-RT II mounted on a Canon 5D Mark iv (or any canon camera for that matter), trigger another YN600EX-RT II mounted on another tripod, without triggering its own flash ? (...
1
vote
5answers
3k views

How to fire an external flash in Liveview mode on a Canon 77D?

I've bought a non-TTL Yongnuo flash (YN-560 IV) for my Canon 77D and it works fine when shooting through the viewfinder. However switching to Liveview mode, I found out that it annoyingly stops ...
1
vote
1answer
140 views

Yongnuo YN622C-TX + Canon 580 EX will not operate in Manual Mode

Equipment: Canon 5D Mark II, Yongnuo YN622C-TX with 622 transceivers, Canon 580 EX I'm having some issues with the Yongnuo equipment. It seems to work fine in E-TTL using 580 EX flashes. HOWEVER, ...
1
vote
1answer
69 views

How can I control manual flash settings on top of the camera using Yongnuo YN-622C II E-TTL?

I'm using a 5D Mark III and two Yongnuo YN-622C II E-TTL triggers. One is on the camera with 600EX II-RT speedlight on it and the other one is with another manual speedlight. The problem is that I ...
4
votes
1answer
187 views

How do I stack different brand flash controllers on my Canon 5D Mark III and still have full TTL and power control?

I am trying to control two off-camera flashes with my Canon 5D Mark III. The first flash is a Profoto B1. The other flash is a YN600EX-RT speedlight mounted on a Yongnuo YN622C II transceiver unit. ...
1
vote
1answer
114 views

Canon/Yongnuo YN-E3-RT compatible with Flashpoint strobes? [duplicate]

Can I use a Canon/Yongnuo YN-E3-RT radio controller to fire Flashpoint strobes? I don't need TTL, just manual control and firing.
7
votes
2answers
3k views

Are Yongnuo flashes interchangeable between dslr's or are they brand specific?

I see the Yongnuo triggers are brand specific. For example YN-622c (for Canon) and the YN-622n (for Nikon) I was looking at the YN-565 and YN-568 but did not want to make a wrong purchase and buy a ...
1
vote
1answer
130 views

No signal from Nikon D750 to Yongnuo YN622N-TX

I've used this set up successfully before, but now I can't figure out what the problem is. I have the YN622N-TX in the D750's hot shoe, and the YN622Nconnected to the YN568EX flash off-camera. When ...
0
votes
1answer
75 views

How do I pair a yn660 speedlight with the yn560-tx transmitter

I can't get the yn560-tx to control my new yn660 light. The flash fires on test. So it is working. If I push "act" I can test fire the flash from the transmitter, so they do connect, but I can't ...
2
votes
2answers
127 views

I have a Canon 7D, a Yongnuo YN685, with its trigger and an AmazonBasics flash. I need to fire both remotely

So, I need to fire both the Canon and the Amazon Flash at the same time. I know Amazon has a built in optical receiver, however this will not help because the flash will be inside a softbox, thus ...
0
votes
1answer
215 views

Is it common for Yongnuo flashes to overheat and stop working?

I have had a Yongnuo Macro Ring Lite YN14EX flash for a little over a year. I have used it 4 times; it worked great. The battery door does not close all the way now, but after looking at many reviews ...
1
vote
3answers
1k views

Why is my YN-560-TX on-camera not triggering my RF-605C and Canon 430EX II?

I bought a Yongnuo RF-605C and Yongnuo YN-560-TX and I can't work with them. I think that there is no connection between them. The flash works properly when I use the triggers off of the camera (Canon ...
0
votes
2answers
306 views

Buying Yongnuo flashes

I am a beginner photographer and I decided to start experimenting with light. I want to buy two cheap inexpensive flashes and I found this Yongnuo model: YN560III. I don't have any knowledge about ...
18
votes
4answers
6k views

What are the Yongnuo flash naming conventions?

I'm trying to get an idea of which Yongnuo flash will fit my requirements. I'd like to have a flash to pair with my SB-900 with TTL support for use both on and off camera (Nikon CLS-compatible). My ...
3
votes
2answers
1k views

Why is aperture stuck at F1.8 on Yongnuo 50mm for Canon EF?

I recently bought a Yongnuo 50mm for my Canon 5D MkIII. I'm having problems adjusting the aperture, it seems like it always shoots at ƒ/1.8. I adjust the aperture in the camera up to ƒ/22 but it ...
1
vote
1answer
133 views

Can a Yongnuo YN-560 III wireless flash be used with a Hahnel Combi TF (both for Nikon)?

Can a Yongnuo YN-560 III wireless flash speedlite for a Nikon DSLR be used with a Hahnel Combi TF for Nikon?
0
votes
1answer
186 views

What do I need to do to trigger my Yongnuo 560IVs reliably from a distance and behind objects?

I am shooting with Canon 7D Mark II and I am currently trying to get into the flash photography. I am still working on a budget so I started with two Yongnuo YN-560IVs and a YN-560-TX transmitter. ...
1
vote
2answers
456 views

What should I look for when choosing a speedlight to learn off-camera flash?

I am going to start learning flash photography for portraits (80% environmental portraits outdoors in bright daylight, and 20% indoor). I want to use flash mostly off-camera. I have a Nikon D5500 ...
4
votes
1answer
417 views

Why is my Yongnuo RF-600TX not working with my YN-560 IV?

I've just bought a Yongnuo RF-600TX transmitter but it looks like it doesn't work with my YN-560 IV flash. Does anyone know how to set up these things?
1
vote
1answer
734 views

Why can't I trigger my Yongnuo flash with my Yongnuo transmitter?

I have a YN600EX RT II flash and a Yongnuo RF603II wireless transmitter, and I'm using a Canon 700D. If I am right from the research I have done, I don't have to use both transmitters to make my flash ...
-1
votes
1answer
212 views

Will my Phottix Ares ii triggers work with Yongnuo YN 560 III speedlights?

At the moment I’m using a Canon 100D. Will the Phottix Ares II transmitter and receiver work with a Yongnuo YN-560 III speedlite?
4
votes
1answer
449 views

Yongnuo YN468-II: How can I turn off the beeps?

I have a Yongnuo YN468-II and it beeps while the flash is focusing. How do I turn them off?
1
vote
1answer
661 views

How do I sync a Yongnuo YN560 III speedlight with a Canon 6D?

I'm a beginner in photography. My company owns a Canon 6D with a Yongnuo YN560 III speedlight. I fixed the speedlight perfectly with the Canon 6d hot shoe. Sometimes the speedlight works in some ...
6
votes
1answer
469 views

How to fire studio strobes with a Canon 580EX flash using Yongnuo transmitters?

How do I set up a shoot using my 580EX (Mark I) flash mounted on a Yongnuo transceiver on my Canon 5D Mark II and then fire 2 extra Hensel strobes with transceivers on them as well? Does my 580EX ...
0
votes
1answer
1k views

How do I use a remote shutter trigger and radio flash triggers simultaneously?

I would like to shoot my Fuji X-T2 with Flashpoint remote shutter release and off-camera Yongnuo flashes and radio transmitters (622 series). I also have a YN600EX-RT I could link in. All components ...
4
votes
2answers
15k views

Differences between Yongnuo flashes - 560, 568 and 685

I am looking to get a speedlite for my system (Nikon D7200 at the moment). I know you can save a lot of money by buying off-brand flashes, and I've heard good things about Yongnuo. There are three ...
1
vote
1answer
135 views

Why do Yongnuo 588 flashes lose flash power as I zoom in? [duplicate]

I have had two or three of the Yongnuo 568 speedlites and use them with a Canon 24–70mm L lens on a Canon 5D MkIII and a 6D. The problem I have on both is when I zoom in the power is not correct. If ...
1
vote
3answers
169 views

Does Yongnuo YN622C TX/RX accept rechargeable NiMh AA batteries?

I just bought a controller and a pair of slave units. According to the specs, every unit accepts two AA batteries. I thought of using eneloops, but I'm finding reviews that say they don't work with ...
1
vote
2answers
7k views

Any way to force HSS for Yongnuo 560 IV

I recently bought myself a pack of four YN560 IV's and a YN560-TX for my Canon camera, and apparently I got ahead of myself and didn't realise I should make sure the flashes support HSS. I tried them ...
3
votes
2answers
6k views

Can I trigger a Godox SK400 with Yongnuo triggers?

Can anyone tell me ... can I trigger a Godox SK400 strobe with a Yongnuo trigger/ transmitter? I use a Yongnuo speedlight and transmitter but I am about to buy a Godox SK400 strobe and would like make ...
2
votes
3answers
17k views

What Yongnuo flash and trigger works with the Panasonic GH4

I am so confused - I'm fairly new to the whole camera trigger thing, as well as new to Yongnuo and the GH4, but here's my thing: All I want to do is figure out what I need if I want to control 2 or 3 ...