Questions tagged [repair]

For questions about the repairing of equipment.

Filter by
Sorted by
Tagged with
42
votes
15answers
144k views

Why does fungus form in lenses, and how to get rid of it?

Recently I was using an old Pentax 50mm f/2 that had a quite big green spot, and later I was informed that it was a fungus. A couple of questions raised from this: Why does fungus form inside the ...
12
votes
2answers
435 views

Does Canon have a no lemon policy on EF lenses?

After a certain number of repairs or warranty claims does Canon replace the equipment? Specifically Canon EF lenses. If no defined policy exists, do you have experience one way or another?
11
votes
5answers
7k views

Front element shattered, can I have my lens repaired?

Can I send in for repair a lens that has a shattered front element? UPDATE: The front element was not shattered, it was the UV filter. Factory diagnosis: Lens assembly had been impacted; cleaned ...
11
votes
4answers
1k views

Experiences with lens repairs - Quality degradation?

A friend of mine fell with my new Canon EFS 15-85mm lens - nothing happened to the camera, but the lens is... well see for yourself: As you can see the top part of the lens looks bent towards the ...
10
votes
3answers
427 views

How can I know if two lenses have interchangeable elements?

This simple question might have a not so simple answer, and I want to ask it about a single lense, but assume that would be off topic, because I'd basically be asking 'should I buy this to repair my ...
10
votes
3answers
1k views

Is my Canon speedlite really dead?

My Canon 550ex wouldn't switch on yesterday. Completely dead. Changed the batteries (twice). Still nothing, no indication of life. It was fine last time I used it about a week ago. Is there anything ...
10
votes
1answer
14k views

How to fix an image sensor damaged by long sun exposures?

I took a number of shots of the sun during mid-afternoon and now all my images have pink spot where the sun was. Is there anyway to fix this, or is it permanently damaged? The camera was pointed at ...
10
votes
1answer
838 views

Where is the best place to get my beloved Rollei serviced?

My father gave me a old MF Rollei a few years ago. I've taken it everywhere I travel and gotten some great shots out of it. I know film is much more expensive and quickly going out of "style" as the ...
9
votes
4answers
30k views

How can I fix a broken lens/autofocus?

My 35mm f2 canon lens's autofocus has stopped working. In manual focus mode the focus wheel is locked, and in autofocus mode the focus wheel spins freely but does not change the focus at all. In ...
9
votes
3answers
324 views

How do you tighten loose controls on camera / lenses?

I have this problem: the mode selection wheel on my Canon 5D II is much looser than I'd like and changes values randomly as I take it out of the camera bag. Same thing sometimes happens to the ...
9
votes
2answers
11k views

I cannot open the internal flash on my Canon 60D camera; how do I fix it?

I tried opening the internal flash on my Canon 60D camera the other day and it didn't open at all. I couldn't understand why. After messing around in the menus, I found out that the camera thinks that ...
9
votes
2answers
1k views

How to clean a lens cover?

I own an all-in-one camera: a Canon Powershot A710. I'm not aware what happened exactly, but now the automatic cover (the thing that opens when you turn on the camera and the lens pops out) is sticky ...
8
votes
4answers
905 views

How can I make this image appear OK on an average monitor?

I have taken a portrait picture which has to look good. It does look good on the Dell 2410 I use for editing. On the garden variety Fujitsu I use as a secondary monitor, it is terrible. In the face, ...
8
votes
1answer
274 views

My 4x5's Rangefinder image is shifted horizontally

I have a Busch-Pressman Model D 4x5 camera (1940's I think) with a synchronized Meyer-Opticraft Rangefinder. I have been trying to fine tune the rangefinder in order to make it useable, but there is ...
8
votes
3answers
3k views

What grease to use on zoom drive gears?

I've had to tear down my Canon A490 pretty much to individual pieces, in order to get a whole load of sand out of the works. In the process, I've probably washed off most of the grease that was in the ...
8
votes
5answers
2k views

How can I seal the sticky rubber on an aging Sigma lens?

I have been gifted an old Sigma lens from around the early 90s, but as is common with the soft-touch rubberised coating on lenses of this age, the material has started to degrade and has become sticky....
7
votes
5answers
6k views

How do I disassemble my Canon 18-55mm lens to repair water damage inside it?

My Canon 18-55mm lens has residue on the inside of the lens. I'm trying to take it apart, but I've tried 8 different screw drivers and these screws won't budge. What else can I try?
7
votes
5answers
14k views

Why is my Nikon 18-200 lens not focusing at higher focal lengths?

My Nikon 18-200 lens on a D300 camera will not focus when it is zoomed between 135mm and 200mm. Is there any tips on how to solve this besides handing it in to a photo store?
7
votes
4answers
3k views

Is it worth repairing a broken kit lens?

I dropped my camera while on holiday last summer. Thankfully, my camera wasn't damaged but the kit lens has lost the ability to autofocus and the UV filter and 58mm to 52mm filter step-down (I use it ...
7
votes
3answers
3k views

How to tell if a polarizing filter is too damaged?

I dropped my CPL onto some rocks and it's a bit scratched up. There's no obvious effect in a (very cursory) look at the photos, but are there tests I can do to see if the damage has a visible effect?
7
votes
2answers
6k views

How do I disassemble FujiFilm X-T1 camera to disable the ISO dial lock button protection?

I'm sure many people dislike the awful ISO dial lock switch on the FujiFilm X-T1 cameras. Fuji fixed it on the X-T2 by replacing it with a toggle switch. But frankly, I think most photographers use ...
7
votes
4answers
1k views

What should I use to re-stick the thumb rest on a Canon 550D?

I have a well loved and well used Canon 550D. This has lost a couple of mostly inconsequential bits of rubber over the years, but recently the thumb rest has come off: Most importantly, this is a bit ...
7
votes
1answer
1k views

What sort of damage in a camera can cause these photos?

I've a Sony DSC-F828. Every time I use the camera, I get the following problem after several shots. I get either: A striped image which is overexposed even if I use a very short exposure time (ref. ...
7
votes
1answer
4k views

How do I remove a broken lens mount ring from a lens?

Today my Nikon d90 was drop with attached Nikkor 18-200mm lens. The lens detached from the body and ripped of the metal ring with screws from the body. How can I fix it? I don't know how to remove the ...
7
votes
4answers
4k views

How can I fix a sticky polarizing filter?

I took a gamble and bought a used B+W Circular Polarizer off eBay. The filter looks great but the adjusting ring is a little bit sticky. Is there some way to lubricate this?
6
votes
4answers
4k views

How to fix a bent lens mount hook/tab?

I dropped my lens and it got bent at the little metal hooks/tabs that latch it to the body. Is there any way to fix this kind of damage (see image)? You can see the bend to the left (the hook is ...
6
votes
8answers
32k views

How to do DIY repair of rubber grips on Nikon cameras?

The rubber grip is peeling away from my D700, just near the autofocus mode selection switch. That whole (tiny) section of the grib is pretty much coming away. How can I do a DIY repair? What ...
6
votes
2answers
1k views

Canon 70D Viewfinder info battery logo dead pixel?

It's not a problem to me, but I was just wondering is it meant to be there or is it manufacturing error?
6
votes
1answer
318 views

Should I get a lens repaired or buy a new one?

I have a 28-135mm Canon lens that I picked up a few years ago for $200. The zoom has started sticking in the last couple of days. It still focuses fine, but can be annoying trying to zoom in/out (...
6
votes
2answers
1k views

Old photos (plusmin 25) years seem to be glued together: a solution?

I started looking at some very old family albums lately. In some of them there was no plastic-ish foil in between pages, so that photos of adjacent pages were touching eachother, front end of one ...
6
votes
3answers
497 views

I dropped my P&S, can I fix the zoom by myself?

I dropped my P&S, and now the zoom barrel is like this: It's out of warranty, what's the best way to fix it? Take it apart? Hit the barrel with something? Push it?
6
votes
2answers
738 views

I would like to bare open my Canon D-SLR. Which tools should I buy and use in order to get the best results?

By best results, I mean, not damaging the tiny screws or any other fragile part of the camera. I would like to be able to open it, and then close it again.
6
votes
4answers
10k views

Where can I get replacement parts for Canon cameras?

My son accidentally cracked a glass on the back of the camera. It is not an LCD itself, but rather a protective cover over the LCD. I took the camera to photo store and they said they can order the ...
6
votes
1answer
619 views

Does the manufacturer reset the metadata shutter count when replacing the shutter?

I've read about this across different forums but have not found a satisfying answer. Does the manufacturer (Canon in particular) reset the metadata shutter count when replacing a shutter?
6
votes
3answers
1k views

My DSLR appears to be corrupting CF cards — get new camera or repair?

I have a Canon Rebel XTi which has been ruining CF cards (when I try to see the pictures it tells me the CF card is corrupted--three different cards which were formatted). Anyway I want to know if I ...
6
votes
1answer
383 views

How many moving elements in a Canon A490?

I got mugged a few days ago, but got my camera back in the end. Bonus: I got some sand too. I now have the camera in pieces, cleaning them as I go along, and the lens barrel extends and retracts ...
6
votes
1answer
390 views

Will a firmware update/change erase Canon's service center lens calibration settings?

Since it's pretty cheap in Korea, I sent all my prime lenses and my new Canon 60D to be calibrated at the local Canon service center so they can be "matched" to the body. If I install a newer updated ...
6
votes
2answers
1k views

How do I repair a detached SB600 flash head tilt/rotate lock-release button?

The rubber cover that I press to tilt/rotate the head of my SB-600 flash has come off after years of abuse, and it looks like the original adhesive has dried out. Can anyone recommend some non-...
6
votes
3answers
1k views

Have I broken my Canon 28-135mm lens after DIY repair?

Last week I removed the front element from my Canon 28 - 135mm lens to remove a grain of sand from the lens. It was easy to remove the 4 screws, take of the top layer of glass and remove the grain. I ...
5
votes
7answers
7k views

OM-D E-M5 Takes One Photo, struggles, Shuts Off

After a period of not using my OM-D E-M5 (maybe six months), I took my camera out to use it. Upon taking a photo the screen goes black, as if struggling to record the image, and then shuts down. If I ...
5
votes
2answers
3k views

What might make focus points blurred/gone from viewfinder on Canon T2i after cleaning?

The red lights are all but lost in my T2i now....barely a haze of a blur. The focus points work fine, and I get the audible beep, but I have to check my focus point on the back before shooting and I'm ...
5
votes
3answers
1k views

What are the options for a damaged zoom lens?

I have had a Nikkor 18-55mm lens for about 3 years. I just realized that my lens only zooms upto 45mm and then gets stuck. This was my first SLR lens, and I did not pay attention to the zoom range ...
5
votes
2answers
4k views

How do I repair stripped threads of a tripod mount?

The tripod mount of my Canon 1Ds has been worn out and I need to repair it. I've been searching the Internet and found this method involving using a Helicoil Eco kit. It seems like a sensible (both ...
5
votes
2answers
13k views

Can lens coating be reapplied?

If the lens coating is torn or worn of by extended use, is it possible to reapply it? I don't mean a do it yourself repair, but rather a repair performed by the manufacturer. It also may very well not ...
5
votes
2answers
2k views

What tools and spare parts are needed to repair Canon 200mm f/1.8 USM prime lens?

The focus of Canon 200mm f/1.8 L seems to be entirely USM driven. Manually rotating the black ring has no impact at all on mine, as it is broken. What tool set would be the best I could buy (from ...
5
votes
2answers
6k views

How can I fix a broken SLR Mirror?

I have an Olympus OM-1 which I've been using as a backup camera for my film Canon Rebel. However, when the mirror trap became stuck "up" in the Olympus, I tried gingerly to pull the trap back down. It ...
5
votes
2answers
3k views

Focus ring stuck on Canon 17-85mm lens

I have a Canon EF-S 17-85mm f/4-5.6 IS USM lens on which the focus ring is stuck/jammed. Is this something I could easily repair myself? If so, are there any detailed instructions on-line on how to ...
5
votes
2answers
18k views

How to remove stuck 50mm lens from Canon 600D?

I have the Canon 600D and the "nifty fifty" 50mm f/1.8 that cost around 100$. One day when I was trying to switch lenses, I pressed on the lens release button, started twisting the 50mm, and around 1/...
5
votes
3answers
6k views

How to open the broken battery slot of my Canon PowerShot SX100 IS?

I have a Canon PowerShot SX100 IS, and the battery slot is the one in the following picture. Unfortunately, someone borrowed it from me, and the broken slot is now broken in a strange way: it is ...
5
votes
2answers
878 views

How to fix balsam separation?

How can balsam separation between glued elements be fixed? I'm planning to try to fix a couple lenses because what else am I going to do with them? It's about looking nice, optimizing image quality, ...

1
2 3 4 5 6