My Canon EF 85mm f/1.4L IS USM lens is making a noise I never heard before. It takes pictures and focus as usual but produces a constant ticking noise when the image stabiliser is turned on.

  • If you dismount the lens and shake it (gently!) do you still hear the ticking? What if the lens is powered and you shake it (also gently!) Does the sound happen any more or less often if the camera is on a tripod? If you pull forward firmly but gently on the focusing ring, does it change or stop the ticking? – PhotoScientist Jun 4 '18 at 19:45
  • Even if we do diagnose the problem here I'm afraid the only definite answer will be for you to have it serviced by a professional. I guess you could just turn IS off too :/ – PhotoScientist Jun 4 '18 at 19:46
  • 1
    Am I the only one who thought it was getting ready to explode? – xiota Jun 5 '18 at 0:44

Many reviews I've seen and a lot of comments in various forums have commented on the sound that the EF 85mm f/1.4 L IS makes when IS is first activated, while it is active, and when it is deactivated.¹

The EF85mm f/1.4 L IS has some relatively large optical elements for the overall size of the lens. Larger and heavier IS elements mean more powerful motors are needed to move the IS elements. This is most likely the basis for the noticeable noises. Because the overall lens is smaller and has less mass and fewer other materials absorbing and insulating the sounds made by the IS unit it is more noticeable to users. The large IS units on those massive Big White Super Telephotos lenses also tend to be further from the camera and the ears of the photographer than the IS unit on the EF 85mm f/1.4 L IS.

Then there's also the "rattling" noise that any Canon IS lens can make if detached from the camera while IS is active, rather than 'parked' first. It's probably more noticeable with a relatively small lens with relatively large IS elements for the same reasons discussed above. For more about this, please see this Canon Digital Learning Center article.

¹ Here are a few of them:


I just had the problem that you are talking about in my 1 year old 85mm f1.4L IS lens. I talked to a lens expert at Canon repair in Jamesburg, NJ and he told me to do the following to stop the noise:

  1. Place the 85mm 1.4 lens on your camera.

  2. Make sure that IS mode is on.

  3. Push the shutter down half way as though taking a shot.

  4. Release the shutter.

  5. Turn the IS mode off

  6. Push the shutter down half way as though taking a shot.

  7. Release the shutter.

  8. Remove the lens from the camera (or leave it on) and move it about gently. The noise should be gone.

This is similar to what an early email suggested.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.