-1

Can anyone tell me what this filter is? I am talking about the low-quality, fuzzy look of the example pictures.

I have been looking everywhere for it, but I do not know the name of it! Also, does anyone know how to apply this to your own photos? (e.g apps)

Some examples: https://i.ytimg.com/vi/64PONBKPs0Y/sddefault.jpg

Source

https://images.genius.com/d55f6749a3ac693880eff928c548383c.500x500x1.jpg

Source

https://78.media.tumblr.com/c4cebad6db817f2bb4a9c0586346d8f4/tumblr_ndrdampvNW1s13wj2o9_540.jpg

Source

http://directlyrics.com/img/upload/gnash-stargazing-lyrics.jpg

Source

  • Sorry for being so brief about what filter I was looking for From the examples shown, I wanted to find a filter that would make your pictures look 'low quality' like, and fuzzy. Its quite hard to describe. – Emily May 7 '18 at 14:09
  • When you say “filter”, do you mean a piece of glass you put in front of a lens for an effect? Or do you mean a digital photo editing technique? – Mike Sowsun May 7 '18 at 21:17
2

I don't think there's a filter here, per se. The images are fairly dark ­— one might say "underexposed", although that's subjective — so you'll want to choose exposure settings below what your camera's meter selects. (You can usually use Exposure Compensation for this — dial it down by a few stops, to -2 or -3.) The digital-noise look is a result of high amplification, which you get by... well, not having enough light. One way to do that would be to fix your ISO at 3200, 6400, or higher and choose the negative exposure compensation.

See What is the relationship between ISO, aperture, and shutter speed? if you are ... fuzzy (um, sorry) on the concepts here. In short, ISO, Aperture, and Shutter Speed need to be set together to balance the light available in the scene to get a neutral exposure. You want to set a little bit darker than that, and as noted, you probably want to prioritize bumping up ISO to increase noise. And, if your camera has a customizable "noise reduction" setting, turn that off — or shoot in RAW and disable (or turn down the strength of) noise reduction in your RAW processing software.

You can also do this in post-processing to some degree by using your software's exposure adjustment or tone curves tool to darken the image, and then running a filter to add noise.

And, you may want to save your result as a high compression level (low quality) JPEG as the output — the examples you give definitely exhibit jpeg artifacts, but I honestly can't tell if that's what you like about these images or just something that happened to the examples you found online (where high compression is common to speed transfers and save data).

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.