What's the difference between different autofocus point types (cross vs point and such)? Cross points seem to be a "feature" — why?


2 Answers 2


Phase-detect autofocus sensors are basically tiny, simple rangefinders — light from each side of the lens is split into two paths, and the two paths are projected onto small linear sensors. The difference between the pattern of light and dark is analyzed, and the amount of front or back focus instantly calculated. (That's why phase-detect autofocus is so much faster than contrast-detection as implemented in most point & shoot cameras — with that, the lens has to seek back and forth to find the point of most contrast.)

If you've used a manual-focus camera with a split-prism in the center of the focusing screen, you can recognize same basic principle at work. As with that, the pattern you're focusing on has to be conveniently aligned against the direction of the split prism for it to be of any use.

A cross-type sensor is simply two linear sensors crossing each other (making a cross shape), which is superior because it can work with both vertical and horizontal light patterns.

In manual split-prism focus aids, it's common to align the split diagonally. This conveniently works with both horizontal and vertical lines/patterns. Some Canon cameras use a diagonal cross for their center sensor. There's other possibilities as well: the Sony A700 uses multiple crossed sensors in a # hash configuration.

Apparently some high-end SLRs use a rectangular autofocus sensor which basically is a small, low-resolution copy of the whole image — more like focusing with a real rangefinder camera, automatically. (Wikipedia tells me this is called "Area SIR", for "area secondary image registration".) That's out of my price range, though.

And, it's worth noting that different sensors can have different sensitivities — more sensitive ones work more precisely at wider apertures, with the trade-off being that they don't work as well with lenses limited to slower apertures. That's covered by a whole different question and answer.

  • \$\begingroup\$ The EOS 40D apparently has diagonal sensors for the center point: »Additionally the center point is now twice as sensitive as any other point with lenses of F2.8 or faster and has cross-type sensors set at forty-five degrees.« (dpreview.com) \$\endgroup\$
    – Joey
    Commented Mar 15, 2011 at 11:05

Cross focusing points focus on contrast changes both horizontally and vertically (2 dimensional focusing) where as normal focus points work vertically only (single dimension).

Cross points give a better chance of locking on to changes in contrast which is how AF works so your AF becomes more effective the more cross points you have.

There is a good article here which explains in more detail about half way down the page:


  • \$\begingroup\$ I'm not sure that link is right, as it talks about increased contrast, not phase detection. \$\endgroup\$
    – mattdm
    Commented Mar 14, 2011 at 22:52
  • \$\begingroup\$ The principle of the cross point remains the same though (whether the method of focus detection is contrast or phase) which is the subject of the question. \$\endgroup\$
    – JamWheel
    Commented Mar 15, 2011 at 15:08
  • \$\begingroup\$ Okay, but what uses contrast-based focus detection with cross-type (or linear) sensors? Don't they usually use a high-pass filter reading from an image sensor? \$\endgroup\$
    – mattdm
    Commented Mar 15, 2011 at 15:16
  • \$\begingroup\$ Good question :) The phase detection put in lay terms is contrast detection when you boil it down to the very basics I suppose "The difference between the pattern of light and dark is analyzed" the difference between light and dark is the contrast, no? \$\endgroup\$
    – JamWheel
    Commented Mar 15, 2011 at 19:18
  • \$\begingroup\$ I suppose so. :) \$\endgroup\$
    – mattdm
    Commented Mar 15, 2011 at 19:22

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.