JPEG images from my Nikon D3300 are roughly 12-15MB big at 6000 x 4000resolution. RAW images converted to JPEG through LightRoom are also 12-16 MB. I recently created an album through VistaPrint software, upon exporting I found that it compresses images and saves it to a folder before uploading it to VistaPrint server.

16MB image was reduced to mere 1.2-2 MB maintaing the resolution and image quality. I could not find any quality difference between the two. Now I am wondering it its really worth storing images at 12-18MB size on my HDD? I considering exporting all my images through VistaPrint software and storing those instead of the original JPEGs.

  • 1
    You may find Is it worth using Pentax's Premium JPEG quality setting? helpful. The specific investigation is with Pentax, but the general concepts apply to Nikon or any other brand as well.
    – mattdm
    Dec 11, 2017 at 15:04
  • 4
    It's entirely possible (even likely) there is a quality loss going from 12 - 18 MB down to 1.2 - 2 MB, even if you aren't able to detect it. Sometimes we only notice artifacts that can be created by such a process in specific situations. Dec 11, 2017 at 16:00
  • 4
    Why would anyone want low quality pictures, @Arbaaz, you would because they take up less space, and you can't tell the difference as described in your question. If you're not going to crop or edit an image, and you're really just going to look at lower-res versions, you don't need the additional quality on the pixel-by-pixel level.
    – JPhi1618
    Dec 11, 2017 at 16:56
  • 2
    If you provide a link to a 12MB image and the corresponding 1.2MB version I will happily point out the artifacts to you, then you can decide if they really are worth the extra space or not.
    – Octopus
    Dec 11, 2017 at 18:14
  • 1
    Hey @TobiaTesan, welcome to Photo.SE. It looks like your comment could really be an answer to the question. Answering a question in comments causes a number of problems and should be avoided.
    – AJ Henderson
    Dec 12, 2017 at 15:29

2 Answers 2


Without going into a detailed explanation of JPEG, it is (in general) a lossy format: if you save a file as JPEG and then load it again, some of the pixels will have changed. However, unless you know what to look for you may not notice the changes. Moreover, there is flexibility as to how much information is thrown away: the more you lose, the smaller the file, but the more likely that the differences will be noticeable.

Your Nikon D3300 has three levels of JPEG quality (= compression): basic, medium, and fine. I suspect that if you adjust it to use basic JPEG then the result will be files of about 2-3MB instead of 12-15MB. (This is off the top of my head, based on what I observe on my D5300, which has the same sensor size).

However, dedicated image processing software has many more levels. It's not unusual for software to offer 100 different levels of compression (= quality). If you use the GIMP then when you save as JPEG you can adjust a quality slider and view in real time the results of the compression and the size of the file it will produce.

What I do personally is to save everything in RAW + Basic JPEG; I use the JPEGs as full-size "thumbnails" to decide which RAW files to process into high-quality JPEGs using Darktable. From memory, I think that I have Darktable configured to export at quality 98 of 100. Typically it produces files about 5MB, but the size obviously depends on how tightly I crop as well as the complexity of the scene. I would be surprised if Lightroom doesn't have a similar setting somewhere.

Factors to take into account:

  • Whenever you load a JPEG, edit something, and save as JPEG you apply a cumulative lossy compression. There are certain changes to a JPEG which can be made without increasing the information loss, but they are limited to cropping at certain points in the image, flipping or rotating by multiples of 90 degrees, and certain colour transforms; and they require specialised software. Therefore if you only store compressed JPEGs you are effectively committing yourself to not making future edits.
  • Whether it is "worth" storing a larger file depends on whether you have an SSD or a spinning rust drive (i.e. how much it costs per MB) and how many photos you take. I personally have taken on the order of 70000 photos in the past two years and am still a long way from filling my disk drive, so in my situation there's no real reason not to keep the RAW files as well as the processed JPEGs. If I get short on space then the first thing I can do is to delete the basic JPEGs, but for the time being that doesn't worry me.


  • You can get smaller files directly out of the camera by setting it to save in Basic or Medium quality JPEG.
  • You can get better control of the quality/file size tradeoff using image editing software. Lightroom probably supports this.
  • Which format to keep for long-term storage is a tradeoff: we can give you pros and cons, but the decision of which are more important is yours.
  • 1
    @EricShain, I understood the question perfectly: I think you've missed the point of my answer. In summary, if he changes from fine (I already clarified in a comment on the question that that's the current setting) to basic then the photos out of the camera will be smaller; but there are other ways of compressing which give more control; and in respect of the question about what files to store long-term there are tradeoffs to consider. Dec 11, 2017 at 14:34
  • 1
    You’re right. Sorry! Upvoted.
    – Eric S
    Dec 11, 2017 at 14:35
  • 1
    If one person can misread it then others can too, so I've turned the comment into a summary section. Dec 11, 2017 at 14:47
  • 1
    In this case "one person" hadn't had his morning coffee yet...
    – Eric S
    Dec 11, 2017 at 15:04
  • 1
    @PeterTaylor: you say in your answer that you are "a long way from filling my hard drive". For me, the issue with size of photos is not the local storage in my computer but dealing with backups (in particular, the online part of it). What kind of backup setup do you have? Dec 11, 2017 at 17:25

JPEG is a lossy format, some information in the original image will be lost when saving as a JPEG. By choosing different settings when performing the JPEG compression you can trade off image quality for file size. Most software presents the user with a single "quality" setting which is used to determine the parameters to use for the JPEG compression.

The relationship between filesize and perceived image quality is highly nonlinear. As you get towards the top of the quality range the filesize increases dramatically but in most cases there is little impact on the perceived quality of the image.

There can also be slight changes caused by the choice of arithmetic or huffman coding. Arithmetic coding gives slightly smaller filesizes for the same quality but not all decoders can read it (historically it had patent issues, AIUI the patents have now expired but still not all software has updated it's decoder libraries).

You should try out different quality settings in lightroom and/or your camera, I expect you will see a similar case of dramatic reductions in filesize without immediately noticable changes in quality.

Having said that you should also remember that once you throw something away you have thrown it away and that just because quality loss is not immediately apparent doesn't nessacerally mean it is not there. For example a lower JPEG quality may destroy shadow details that is not readilly visible to the naked eye but can be brought out through retouching techniques. This is especially a concern when doing JPEG in-camera, it's much less of a concern when you are using RAW files for capture and archival and only using JPEG as an output format.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.