Those appear to be codes from a Fuji Frontier automatic film processing lab machine or one of its older predecessors. Such machines were/are popular at mass retailers who did/do one hour photo processing and printing.
Users have some leeway in assigning what information is printed using the codes on the back of the print, so there is some variation depending on the specific user's preferences. Some mass retailers used a standardized format across all machines in all of their stores, other chains seem to have used whatever the individual tech who set up the machine selected and can vary significantly from one location to the next. Here's what your first sample code probably means:
032 12+00 NNNNN+15AU 0110
032 - Identifies the specific machine among other machines the same operator may own. Mass retailers with less than 999 locations could assign a different code to every machine they owned in all of their locations using this field. This could also be used to represent the roll number, job number, or even the sequential negative/print number.
12+00 - Two codes representing the film maker and film speed along with film density. Used by the machine to apply a specific profile that had been previously entered for that particular film. Each machine could have different numbers assigned for the same film maker. Film maker '1' might be Kodak for one machine and Fuji for another. Film speed '2' might be for ISO 100, ISO 200, ISO 400, etc. depending on the numbers assigned for that machine. The two numbers after the '+' symbol usually related to film density. If the film was processed "straight" (i.e. ISO 400 film was developed as ISO 400) and the resulting density of the negatives were "average" (kind of like our modern expectation of the average brightness of a digital photo being 18% gray) it was usually +00. If the negatives were darker or lighter than normal then a '+' or '-' number would be applied to bring them back to an expected "average". This is where an operator paying attention could notice that the shots were supposed to be brighter or darker than "average" and use a more appropriate number.
NNNNN - represents the amount of correction manually entered by the operator for cyan/magenta/yellow (some machines reversed the order to yellow/cyan/magenta) and two user assignable parameters. If the letter 'N' is used, it means the default setting for that particular machine (at the time the print was made) was used and no additional manually entered correction was done. Since the user of each machine could assign their own default profiles and custom changes for particular films (identified using the XX+XX code) the amount of correction in this field is pretty much meaningless unless the machine's software version and profile loaded into the machine at the time the print was made is known.
+16AU - Identifies auto-correction applied by the machine's automatic routines. AU is for 'Auto', not 'August'.
0110 - Another user assignable sequence number. It could be the job, roll, or print number for that day.
I've also seen prints from Fuji machines that use the following format. When the < xxxx> brackets are used, the number inside is almost always a sequence number corresponding to the negative number on the roll of film.
< No. 02 > 003 22-02 NNNNN-32AU 0032
When dates were included in the codes they were usually fairly obvious, such as:
APR96 001 0111 NNNN
Some stores chose to print the date on a separate line from the developing/printing information.