I can't wrap my head around how the bright, washed-out colors in these images are achieved. Does anyone have an idea?

This Isn't Happiness: Closed for the Season, Salvador Cueva

1 2 3 4 5

  • \$\begingroup\$ You can get a somewhat similar effect in Lightroom by turning the 'vibrance' down a bit and the saturation up, but I suspect there's more to it than that here. \$\endgroup\$
    – N. Virgo
    Commented Nov 21, 2017 at 4:07
  • \$\begingroup\$ Could you be more specific about what you mean by "washed but bright"? It'd be awesome if you could describe what you are looking for in enough detail that this question would still be useful if the blog post you link to vanishes. \$\endgroup\$
    – mattdm
    Commented Nov 25, 2017 at 12:51

2 Answers 2


They look to be done with a Hue/Saturation/Luminance tool, sometimes called a Hue/Saturation/Value tool. An HSL or HSV tool divides color into eight or so bands and allows you to adjust the hue, saturation, and luminance (brightness) of each color band separately from the other color bands.

In the case of your example, it seems the photos have been adjusted so that the saturation of alternating bands of color are moved in opposite directions. Red is boosted, orange is reduced, yellow is boosted, green is reduced (except the fourth image), aqua is boosted, blue is reduced, purple is reduced and magenta is boosted (particularly in the fifth one). The overall saturation is still held fairly low, but the absence of some colors makes the colors present look more vivid.

What is probably critical to make this work is that all general color casts must be removed. In addition to using the proper color temperature, white balance correction must also be spot on so that the whites in the scene are white.

  • \$\begingroup\$ Great answer! Thank you. I think in order to get this affect you should take pictures with a lot of color in them i suppose. I'll give it a shot! \$\endgroup\$ Commented Nov 21, 2017 at 10:46

One way to achieve it is to use selective saturation adjustments. You can do this a number of ways:

  1. Use a tool that allows adjustment of saturation based on the hue. Some applications have a Curves dialog that allows you to adjust saturation against hue or other such combinations. In Photoshop, you can use the Hue/Saturation adjustment and set it to "Reds", for example, to adjust the saturation of just the red pixels
  2. Color selection - use a tool that selects by color. Once selected, adjust the saturation of only what's selected.
  3. Manual selection - just select, paint, or mask what you want to change by hand, using the pen tool, or whatever, and again, once selected, adjust the saturation of only the selection

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.