I have been using my camera (Nikon D5100) for around 5 years. Recently I am facing an issue when I use the kit lens. If I take a group photo (of a group of people) standing not very far from them, the autofocus works well but after clicking if you examine the image by zooming in, it shows that none of the persons in the photo are in focus. It keeps happening.

But If I zoom on anyone and then click, it works fine even though I maintain the same distance from object.

So I decided to zoom first and once I got the proper focus after zooming, then I change the mode to Manual (hoping that focus remains locked) and zoom out and take the pics. Unfortunately, it goes wrong again as I mentioned in the first case.

What could be the issue here? anyone has any input?

  • \$\begingroup\$ What lens are you using? \$\endgroup\$
    – Michael C
    Commented Aug 17, 2017 at 8:32
  • \$\begingroup\$ I guess he is using the Nikon Nikkor 18-55 mm f/3.5-5.6 G AF-S DX VR \$\endgroup\$
    – dannemp
    Commented Aug 17, 2017 at 8:35
  • \$\begingroup\$ Possibly, but Nikon makes a lot of other F-mount lenses. So does Sigma, Tamron, Tokina, Samyang/Rokinon/Bower/whatever else they're selling them as this week/etc. \$\endgroup\$
    – Michael C
    Commented Aug 17, 2017 at 8:38
  • 1
    \$\begingroup\$ Can you post some examples? Does this happen in other situations? Is it everyone out of focus, or just some of the people? What aperture are you shooting at? \$\endgroup\$
    – mattdm
    Commented Aug 17, 2017 at 11:01
  • 1
    \$\begingroup\$ I read this as "with kittens"... \$\endgroup\$
    – user29608
    Commented Aug 17, 2017 at 11:37

1 Answer 1


Your lens is not parfocal. If you had a parfocal lens, you would know it. Mainly because the prices of true parfocal zoom lenses ($10K and up) mean only those who really need them and know why they need them buy them.

A parfocal lens is a zoom lens that maintains the same focus distance as it is zoomed in and out.

Most lenses used by anyone other than professional videographers are not parfocal. When you focus a non-parfocal zoom lens at one end and then zoom it, the focus distance will change and must be adjusted again after zooming to be correct. There are some fairly cheap lenses that are effectively parfocal - that is, they lack sharp enough resolution or a wide enough maximum aperture to be able to tell the difference between focused and slightly out of focus.

That being the case, the answer to the second part of your question is that your lens is not made to be able to do that with any degree of accuracy.

The answer to your first part is a little tougher. It may be that you are just now noticing something that has always been the case. It is not uncommon for zoom lenses to be better on one end than the other, although it is usually the wider end that is a little better. Or it may be that your lens is drifting (or has been knocked) out of alignment and needs to be adjusted. If the lens is a cheaper one that does not cost as much as it would take to get it properly aligned, then it might be time to think about a replacement or upgrade lens.

  • \$\begingroup\$ And also, some zoom lenses are not equally well calibrated for AF at both ends. That is, such a lens may need different AF Fine Tune values at both ends. I had an AF-S Nikkor 17-35mm that was like that. Unfortunately, Nikon does not support saving more than one Fine Tune value per lens. \$\endgroup\$
    – chulster
    Commented Aug 17, 2017 at 22:25
  • \$\begingroup\$ I don't think the D5100 even has AF Fine Tune. \$\endgroup\$
    – Michael C
    Commented Aug 18, 2017 at 3:04
  • \$\begingroup\$ Neither do I... \$\endgroup\$
    – chulster
    Commented Aug 18, 2017 at 3:12

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.