I am a total beginner and my Pentax K 1000 has jammed a few times. Being the noob I am I ripped the film from the canister. I have the film rolls but the film itself is not in the canister. Can I still develop the film?
2 Answers
Film works by changing when exposed to light. If you have exposed the film to light, then any information it captured will be lost as the film will have been completely over-exposed and washed out. If you did it in complete darkness or, if it's orthochromatic, limited spectrum of light to which the film isn't sensitive (like the red lights in a dark room) then you'd be ok, but it doesn't sound like that's the case here.
-
4\$\begingroup\$ Most modern film emulsions are panchromatic, i.e. sensitive to the whole spectrum of visible light, therefore they should be handled in complete darkness! Orthochromatic films, on the other hand, are sensitive only to green and blue parts of the light spectrum, so they can be handled under a red darkroom safelight. \$\endgroup\$ Jul 12, 2017 at 21:43
-
\$\begingroup\$ @lightproof - good to know. I know the basics of film, but I got serious after film had already passed it's prime so I never personally got a chance to learn darkroom work. \$\endgroup\$– AJ Henderson ♦Jul 13, 2017 at 1:15
If you've done this in absolute darkness and kept the film in absolute darkness: Yes, absolutely.
If it received some light: no.