A few months ago I took my then new camera (Nikon D7200) out with a tripod to take some small aperture shots. I noticed a significant amount of artifacts on the resulting pictures. A quick Google search informed me that this was sensor dust and to be expected at these apertures. My camera only had 1600 shutter actuations when I first noticed the spots and both the lenses I used were new. Below are two examples of pictures with the spots. The spots are easiest to see against the sky, but you may have to zoom in to see them. The spots are nonexistent when using apertures larger than about f/18. Is this normal for a DSLR, even when new? Is there a way to prevent/minimize these artifacts at small apertures without post-processing?

First image: f/36, 1 second, 140mm (first lens) Image 1

Second image: f/22, 30 second, 32mm (second lens + variable ND filter) Image 2

  • \$\begingroup\$ Possible duplicate of Why use a small aperture when trying to see sensor dust? \$\endgroup\$
    – mattdm
    Mar 18, 2017 at 8:44
  • 1
    \$\begingroup\$ Certainly related, but that one doesn't really address what can be done to minimize the effects of dust or if it is normal for a new camera to have so much dust in such a short time. \$\endgroup\$
    – Michael C
    Mar 18, 2017 at 9:00
  • \$\begingroup\$ I'm sure we have several of those around here too. \$\endgroup\$
    – mattdm
    Mar 18, 2017 at 23:22
  • \$\begingroup\$ I'm not sure we have any that don't begin at a point where the need for cleaning is already assumed. Or that ask if dust/oil spots are normal for a new camera. \$\endgroup\$
    – Michael C
    Mar 18, 2017 at 23:56

1 Answer 1


Is there a way to prevent/minimize these artifacts at small apertures without post-processing?

Clean the sensor. Or more specifically, clean the front of the filter stack directly in front of the sensor. If you're not comfortable doing it yourself, have it professionally cleaned.

Is this normal for a DSLR, even when new?

For many recent Nikon models it has been. Nikon tends to be sure everything inside the camera's light box that needs lubrication leaves the factory with a healthy dose of lubrication. Sometimes the excess gets slung off by mechanical movement and can wind up on the sensor. If the camera is still under warranty Nikon may perform a cleaning at no charge. It all depends on what geographic world area you live in and the policies of Nikon for your service region.

For all interchangeable lens cameras sensor dust is an issue that must be managed. Even if the camera is immaculately clean when fresh from the factory, over time dust will find its way onto the sensor. Cleaning the sensor can be scary for someone who has never done it before, but it is fairly easy to learn and doing it yourself can save a lot in terms of shipping/insurance costs as well as fees for paying someone else to clean it.

  • \$\begingroup\$ I might add that i was taught to turn the camera OFF when changing the lens so the sensor is not charged and attracting dust while the camera is open. Plus all the techniques used pre-digital to protect the inside of the camera when changing lens's. Hold the camera lens mount down so stuff can't fall into it, protect it form the wind, rain, snow, sand etc. Like Michael said, you can not stop it but you can minimize it. Learn to test to see if you have dust on your sensor and check before you start your shoot. \$\endgroup\$
    – Alaska Man
    Mar 18, 2017 at 8:10
  • \$\begingroup\$ Unless the camera is in Live View, the sensor is not charged when the metering is not active with the vast majority of current DSLRs. Even if it is charged, the shutter curtains would be closed and the mirror would be down, preventing dust from making it directly onto the sensor. \$\endgroup\$
    – Michael C
    Mar 18, 2017 at 8:28
  • \$\begingroup\$ See the accepted answer and comments to: What are the dangers of removing a lens while the camera is on? \$\endgroup\$
    – Michael C
    Mar 18, 2017 at 8:57

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.