0

This question already has an answer here:

I was shooting with a Nikon 16-35 f/4 while suddenly it started drizzling. Before even I could rush back under a shade, there were a few droplets of water all over my camera and lens, especially on the front element of the lens, too. Back home, I cleaned the front glass with a piece of flannel cloth, yet I can see a few stain of the dried water. How can I safely clean the front element of my $1000+ worth lens?

marked as duplicate by mattdm, scottbb, Caleb, Michael C lens Dec 16 '16 at 4:55

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

2

Fist make sure no dirt / grit is on the surface. It never hurts to use a soft camel’s hair brush. Start brushing at the center and stroke outward. I use ordinary Windex but most are squeamish, and use purchased lens cleaning fluid. Just so you will know, I have used Windex on cameras, binoculars, telescopes, microscopes etc. for more than 50 years and never once harmed any lens. But a word of caution, use fluids sparingly, you don’t want any liquid to creep under the rim retainer. If the spot doesn’t come off using Windex or purchased lens cleaner, I apply injection grade alcohol diluted 50% with distilled water using a fresh laundered, well used “T” shirt. Be gentle, start in the center with a moist cloth and work in a circular pattern to the edge. My experience is: Optical coated glass is more durable than people think. I also know that alcohol is used to clean during initial assembly. Keep in mind that distilled water works also and it evaporates without residue. Without residue is the key phrase when it comes to lens clearing. I often make my own lens cleaning fluid. I use distilled water and vodka 50:50. No vodka, which is Ethel Alcohol, I buy Ever Clear at the liquor store, it is 100% Ethel Alcohol. I cut it 25% with 75% distilled water. Works for me.

  • 1
    Whether lens cleaning fluid or windex or an alcohol/water mix, best practice is to apply it to the cleaning cloth or lens tissue rather than directly to the lens. This helps avoid pooling from using too much. – Michael C Dec 16 '16 at 4:40
0

Breathe on the front element to create condensation. Then clean again while wet. If that does not work, clean the front element with piece of appropriate cloth void of any residue (including fabric softener) damp with distilled water.

0

This is a question without a definitive answer. My preference is a Lenspen. Simple as that.

Not the answer you're looking for? Browse other questions tagged or ask your own question.