3
\$\begingroup\$

I'm very new to film photography but I love shooting pictures of my friends indoors at night, so that the light sort of 'illuminates' them as the subject whilst the background remains relatively dark. Not sure if that makes sense.

How can this be done? I'm using an Olympus OM-10. Does the camera have a built in flash or do I need to get an external one?

\$\endgroup\$
1
  • 5
    \$\begingroup\$ Does the camera have a built-in flash? Can't you just look at it?! By the way, no it does not. \$\endgroup\$
    – osullic
    Aug 24, 2016 at 14:11

3 Answers 3

2
\$\begingroup\$

The Olympus OM-10 does not have a built in flash. You need an external one.

I do not suggest getting into flash lighting with a film body. This is where the ability of digital cameras to see the result immediately truly shines (pun intended).

The OM-10 has no control over the flash. You are in full manual in terms of flash and have no idea what you are doing until you develop the film. Human eyes adapt to darkness, which can make it very hard to guess the right flash settings (at least without experience). You can calculate them, with the guide number and the distance - which you'd have to estimate or do you want to get out a tape measure? While reading that last sentence at least two beautiful candid moments went by uncaptured and are now gone. Forever. Yeah, you have to do a lot of thinking quickly if you are going down that route.

\$\endgroup\$
12
  • 1
    \$\begingroup\$ An alternative these days would be an LED lighting panel. Light, powerful, relatively cheap. \$\endgroup\$ Aug 24, 2016 at 14:34
  • 1
    \$\begingroup\$ I disagree with saying, "I do not suggest getting into flash lighting with a film body." I would encourage the OP to try it. I also disagree with, "have no idea what you are doing until you develop the film." \$\endgroup\$
    – Aaron
    Aug 24, 2016 at 14:36
  • 2
    \$\begingroup\$ @AK looks like you missed the part of my answer stating exactly that. Sure you can compute it. You will see if your computation is correct and has the desired effect after you develop the film. Until that, you don't learn anything. And the computation is very limited. Use a (different) modifier or bounce the flash - both very important things to learn! - and you can't do it any more. The point is to learn flash photography, not becoming quick with the math in your head. All in all, not a recommended way to learn flash photography. \$\endgroup\$
    – null
    Aug 24, 2016 at 14:47
  • 1
    \$\begingroup\$ @ElendilTheTall that should be an answer. \$\endgroup\$
    – null
    Aug 24, 2016 at 15:14
  • 3
    \$\begingroup\$ @Alaskaman, Hundreds of thousands learned flash with film--and mostly all they did with it was direct on-camera flash. Harder isn't better, either. A guide number sucks at helping you figure out lighting ratios while you're bouncing. Digital has helped me figure out four-light off-camera setups without an external meter. Film. Not so much. I'm happy your experience was different, but not every person learns things the same way. \$\endgroup\$
    – inkista
    Aug 24, 2016 at 19:38
2
\$\begingroup\$

I agree completely with null. I tried to learn flash with an Olympus OM-10, and I actually learned flash with a Canon 50D. It's a lot easier with digital instant feedback and EXIF substantially lowers your burden of note-taking so that you can remember what you did when you see the results (you'll still need to track light placement and power settings). It's not impossible to learn with film, but it is a much higher and steeper mountain to climb without the instant feedback.

However, there are a few alternatives to running through a lotta rolls and development to learn flash since you can't actually see what you're doing. Because the OM-10 does not have a built-in flash, you have to add an external light source. But it doesn't have to be a simple manual-only flash.

  • You could use a constant light source, such as an LED panel or video light. This may not provide as much light as a flash, but has the advantage of letting you see what you're doing while you're doing it.
  • You could use a manual flash with an autothyristor/external sensor mode.

Autothyristors (or External Sensors; Auto Mode)

Today, most camera/flash combinations can automate the power required to make a good exposure by using something called TTL (through-the-lens metering). The camera tells the flash to send out a small burst of light (the preflash), meters it, and then adjusts the flash's output power. But this requires that the camera and flash both know this communication protocol.

The OM-10 is pre-TTL, so the only way to get automated flash power is to use a flash that has an external sensor (autothyristor) on it. This does not require any camera/flash communication, so can be used both on and off camera, and does not require a same-brand/system flash.

The sensor, after it's received a certain amount of reflected light, tells the flash to cut the power, in effect, automatically setting the power out of the flash based on the shooting situation. You do have to set the iso and aperture you're using on the flash for this to be effective, so if you change your aperture setting as you go, you will have to still fiddle with the flash. And you do need to take care to keep the sensor unobstructed and clean. But this is what folks did in pre-TTL days to not waste rolls and rolls of film on bad flash settings (see The Strobist's "Q&A: How to Shoot Events Without TTL Flash").

The problem is finding a flash with this capability in these TTL-days, as TTL has supplanted Auto modes on most flashes. Canon and Nikon's current high-end flashes can do this (on Canon, it's called "external sensor" on Nikon it's the A-mode). The Olympus FL-600R/Panasonic FL-360L calls it "Auto". Older film-era manual flashes also have it; but you might have to check sync voltage. But I don't think there are any current cheap 3rd-party manual flashes that offer it, other than the Vivitar 285HV/Cactus KF36, but if you use that, you won't have swivel for bounce, or 1/8 power, and it has a weird proprietary sync connector, so not the greatest choice.

Balancing Flash and Ambient

I love shooting pictures of my friends indoors at night, so that the light sort of 'illuminates' them as the subject whilst the background remains relatively dark. ... How can this be done?

In flash photography, this is about tipping the flash/ambient balance more towards the flash, and making sure that the flash illuminates your subject and not the background. It can be done in any lighting conditions with a powerful enough light, but tends to happen more often if you're shooting in darker situations. You're basically underexposing the ambient, and then adding enough flash to bring your subject up to the right exposure level.

When you take a flash image, it's like combining two different exposures. Think of it like Photoshop layers combining to make an image--there's the ambient light (all the light that isn't the flash), and there's the flash. The amount of light you get from ambient is controlled by iso, aperture, and shutter speed. The light you get from flash is controlled by iso, aperture, flash power setting, and flash-to-subject distance (closer the flash, the more light you get).

So, if you set the ambient exposure to be one or two stops below "good" exposure, and then throw some flash on your subject to make up the difference, you'll get a darker background with a well-exposed subject.

See: "Dragging the Shutter" at neilvn.com, and the Strobist's Lighting 101: "Balancing Flash and Ambient".

\$\endgroup\$
3
  • \$\begingroup\$ You can use flashmeter. Align the scene, give a friend the flashmeter, fire the flash, adjust the aperture and shoot the scene. Or you can mout the flash to digital camera, take pictures, find the best one, adjust your Olympus same way and shoot the scene. Set ISO manualy to match the film spec. \$\endgroup\$
    – Crowley
    Aug 24, 2016 at 17:14
  • \$\begingroup\$ @Crowley Why not post that as your own answer? Although, imo, in a social/event shooting situation, there's no time to do that unless you're happy with only posed shots. \$\endgroup\$
    – inkista
    Aug 24, 2016 at 19:26
  • \$\begingroup\$ You have already mentioned off-camera measurement and flashmeter is just a predecessor. If one shoot "action" photos, they need fast and powerful gear or lots and lots of expirience. \$\endgroup\$
    – Crowley
    Aug 24, 2016 at 23:30
0
\$\begingroup\$

As everyone seems to go with flash, here an alternative:

If you use a high-end digital camera, you might not need a flash, and the mood of the pictures is very different without a flash. Also, your subjects might not like the flashing; it is rather disruptive when they try to sit around and relax.

With a camera like for a example the Canon 6D, you can do shots at 16000 ISO without significant noise, and those pictures look quite different than flash pictures. If you want to stay with film, you could buy high-ISO film to accomplish the same, but as others said, it is much harder to learn without immediate feedback.

It is certainly a matter of taste and what you are trying to accomplish - low-light shots are a different art than flash shots, and some prefer one, others the other.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.