I am going to shoot long expo rivers and waterfalls, I have no ND filter yet. I am researching now and I was adviced to use ND-64 for the best result. As I see on amazon there are some different brands with different prices, I am not ready to pay much money right now and want to access ND filter (67mm) that will not be cost expensive and does the normal quality job. So, can you advice which brand to buy?

  • \$\begingroup\$ You could also consider manufacturing an external iris: a piece of black paper with a small, clean, round hole in the middle. This may affect uniformity of image illumination, but it's easy to try out. \$\endgroup\$ Commented Jul 11, 2016 at 11:25
  • \$\begingroup\$ Other's comments on exposed photographic film as an ND filter would be of interest. \$\endgroup\$ Commented Jul 11, 2016 at 12:15

2 Answers 2


When it comes to filters you can get cheap filters. You can get good filters. But you can't get cheap good filters.

There are filters available for 67mm threads that claim to be 6 stop (ND64) filters available for $30 or less. They tend to be of poor optical quality, don't really have the density they claim (most of the cheapest ones are more like 4 stops, if even that), and impart a color cast to the images taken with them.

At 67mm and ND64/ND 1.8/6-stop reduction the price for quality is a little higher.

You can get a B&W 67mm ND64 single coated filter for about $67. That will work OK as long as you aren't shooting in situations where ghosting might be a concern. The next step up is something like the B&W 67mm ND64 multi-coated filter for about $118. Both sides of the filter glass have eight coats on them that eliminate the reflections that cause ghosting and other types of lens flare.

If you are shooting with a very wide angle lens the thicker rings of the two filters above may cause vignetting (making the edges of the image darker). In that case you might need a filter with a "thin" or "low profile" ring such as the Breakthrough Photography 67mm X3 6-Stop MRC16 for around $160. The X3 series of filters are made from high quality glass, have low profile mounting rings, and are weather sealed in addition to using 16 layers of multi-coating.

Breakthrough Photography is a relative newcomer in the filter arena but they have gotten a lot of very good reviews and the optical quality of their filters compare favorably to other, more established brands that cost quite a bit more.

The other question you need to ask yourself is whether you want to use screw-on filters at all, or whether you want to use a square system, such as the Cokin or Lee systems, that use square/rectangular filters and a single holder attached to the lens with various ring adapters for the different lens thread sizes in your bag.

The advantages of the square systems is that you can use high quality filters without having to buy a new set every time you get a lens with a different filter thread size. They are also more flexible to use from a compositional standpoint with graduated neutral density filters. The advantages of the screw-on types are that they are usually cheaper per filter.

  • 1
    \$\begingroup\$ However, for simple stuff like ND filters there's a highly nonlinear relationship between cost and quality. It's like audio cables: maybe a $10 is much better than a $0.75 cable, but the $1000 cable is marginally better than the $10 one. \$\endgroup\$ Commented Jul 11, 2016 at 11:24
  • \$\begingroup\$ In the context of audio cables, a $10 cable is not a cheap cable. A 75¢ cable is a cheap cable. A $1,000 cable isn't an expensive cable, it is a ridiculously overpriced item marketed strictly to those who only want to brag about how much they pay for everything. \$\endgroup\$
    – Michael C
    Commented Jul 11, 2016 at 11:34
  • \$\begingroup\$ The point you are trying to make is that the $10 cable is a cheap cable. It isn't cheap when it costs 13X compared to a 75¢ cable. Just because the $1,000 cable exists doesn't make the $10 a cheap cable. \$\endgroup\$
    – Michael C
    Commented Jul 11, 2016 at 11:38
  • \$\begingroup\$ I'll specify details now.. So I am shooting mostly with Nikkor 18-70mm and sometimes Nikkor 70-300. I decided to buy ND-64 for shooting pictures like this fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/… \$\endgroup\$
    – Arkadi
    Commented Jul 11, 2016 at 17:11
  • \$\begingroup\$ @Arkadi Is the camera you are using with the 18-70mm lens a DX or an FX camera? That will affect the angle of view at 18mm and whether the thicker filter rings might lead to vignetting. Your example photo shows some evidence of either vignetting or light falloff in the edges/corners due to the lens. \$\endgroup\$
    – Michael C
    Commented Jul 12, 2016 at 2:31

Well if you buy one from a retail store, you can try it on, take a few sample shots with and without it and see its quality yourself ( it is easier and better to try it before buying and you can see if it suits your tastes )


Not the answer you're looking for? Browse other questions tagged or ask your own question.