2

I'm considering switching to the Sony A55 (I don't own one at present). The A55 does 10fps in continous drive (but I will only be using around 6-7).

To replicate the visible colors of a fish onto a camera sensor, one needs to supply 'hard light', which I've only managed to do with an external flash so far, open to other suggestions.

However given that Yn560 iii and I presume other flashes need at least a few seconds to recycle, it seems that high speed + flash photography is not realistic. Is this a right conclusion?

Additionally, in the event that the flash does fire multiple times, would it result in say (ideally) 50% illuminated and 50% non-illuminated pictures?

I hope my question is clear, I'm quite confused about the concept myself, so it may carry into my question.

  • Does the Sony A55 have a menu option to set the continuous drive to a lower frame rate? – Michael C May 19 '16 at 21:02
  • @michaelclark- a few google searches reveal that it does infact allow a high and low setting. – Chai May 19 '16 at 21:35
  • 1
    @MichaelClark- I don't own this model, I'm looking to purchase one, consequently I know about it as much any other non-user. So I posted here, to potentially hear from actual users. – Chai May 19 '16 at 21:54
  • 1
    Why do you need 10fps to photograph fish? – null May 19 '16 at 22:50
  • 1
    Your question is about a technical possibility and not art. Asking "why" is not odd at all, especially when it comes to requirements that do not appear plausible (to me). Now knowing that you want to capture action and fast movement, 10fps and flash make a lot of sense to me. It's always nice to have some context. +1 – null May 20 '16 at 12:56
1

It is quite possible within certain parameters. Those parameters would include the ability of the camera body to regulate the continuous drive rate, the ability of the flash to provide the needed light at a power level setting that allows for a fast recycle rate, and the ability of the photographer to find the rate where the capabilities of the camera and flash can work together for the best combined results.

If you can combine the ability to control your burst rate to something around 3 or 4 frames per second and can light the scene adequately with a very low power setting, with many speedlight models it is possible to have the flash fire for every frame in such a burst. You just need to play around with the components you are using and see where your "sweet spot" is.

Some cameras will allow the user to set a continuous drive mode rate that is slower than the maximum for the camera. I've had cameras that gave a choice between, say, 8fps high speed continuous or 3 fps low speed continuous. I also have a camera that will allow me to set the rate from between 1 fps and 8 fps for the low speed continuous setting and from between 2 fps and 10 fps for the high speed continuous setting. There are also quiet modes on some cameras that will reduce the maximum frame rate.

How long a flash takes to recharge after a particular discharge is dependent upon the total capacity of the flash's capacitors and the amount of power used for a particular strobe. Most speedlights control flash power by controlling the duration of the flash. When set to very low power only a fraction of the flash's total capacity is actually discharged. This allows the capacitors to be raised back to full capacity much faster than if a full power discharge had been used. If the flash is capable of drawing power from an external battery pack this will also usually speed up the time needed to recycle.

This is what the external battery pack port looks like on your YN560 II flashes:
Battery Pack Plug
It's on the left (That's the PC Sync connector on the right). It is a fairly standard pin arrangement that most generic external battery packs will fit.

A few flashes will allow the flash to refire as soon as the shutter is pressed with whatever amount of energy is stored in the capacitors. Most won't fire, though, until at least the amount of energy needed for the power to which the flash is set is stored in the capacitors. Some won't fire until the capacitors are fully charged, even if power is set to a low level.

|improve this answer|||||
  • Thank you for your response. I presume the yongnuo flash is probably not sophisticated enough to wait for my camera in burst-mode, what might this feature be called more formally? In that case I will try to keep my flashes on the lowest power and perform a check on the results I get. – Chai May 19 '16 at 22:15
  • 2
    Some Yongnuo flashes can be feed by an external power source, not internal bateries, This also helps. – Rafael May 19 '16 at 23:18
  • Most YN flashes that can use an external battery pack also draw in the internal batteries simultaneously. The power of both combined allow it to recycle much faster. The controls and logic are still powered by the internal batteries. This is not always the case with other brands, but seems to be the norm with Yongnuo. – Michael C May 20 '16 at 2:23
  • @Rafael Thanks for the reminder re: external battery packs. I should have included it in the answer originally and have now added it. – Michael C May 20 '16 at 2:25
  • @MichaelClark- thank you for the picture, I will first explore boosting the ambient lighting of the aquarium itself with an LED fixture, I feel, it should save me the cost of another external flash. – Chai May 20 '16 at 12:22
2

The flash must recycle before it is triggered. Some flashes refuse to trigger unless recycled, but most will flash anyway, but at a lower unrecycled output (irregular illumination results).

A speedlight might need 2+ seconds to recycle if at full power level, but it recycles tremendously fast at low power levels. Try it about at 1/8 power level, then adjust as results show. Lower power will run a longer time (a greater number of repetitive flashes), but only 4 or 5 flash bursts might squeak by at slightly higher power level. Use NiMH batteries (they're faster). Don't overheat your flash.

|improve this answer|||||
  • 2
    To illustrate "tremendously fast", my cheap YN-460-II flashes, set to 1/32 power, will fire as fast as I can mash the test button with my thumb for about ten shots before lagging. If you're working at reasonably close distances, this could easily be a realistic power setting (although I'm not really familiar with losses involved with water). – junkyardsparkle May 20 '16 at 2:21
  • @WayneF- thank you, I use Eneloops, will try this suggestion out! – Chai May 20 '16 at 12:23
  • @junkyardsparkle- thank you! I must try this for myself ! – Chai May 20 '16 at 12:24
0

There are cameras which are capable of continuous drive with the flash. The Nikon Coolpix P7100 is one of them but not the A55. Still, the continuous drive necessarily gets slower to accommodate time for the flash to recharge.

Charging time is not constant either, so you may get a few fully illuminated shots and some not mixed. This will vary according to the flash output, the higher the output, the longer it takes to recharge and so there will be more shots before the charge has reached capacity. Some cameras even block shooting if the flash has not sufficiently charged. There is sometimes an option to control this. Of course, TTL flash metering simply will not work.

|improve this answer|||||
  • Thanks but I am doing macro work with a DSLR, in-built flash on a P&S is a completely different matter. You're right about charging time, thanks for bringing that up! – Chai May 19 '16 at 21:00

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.