Due to some ambiguity, this might not make the best question, but I was curious if anyone with more experience could help identify the post-processing technique used by Kane Longden.

They seem to have a common trait, a smoothness and clarity to the images. They seem flat (in a good way) as if details have been collapsed to remove some of that more raw photographic quality (I'm not doing the best job of describing my perception of this).


3 Answers 3


It looks like the post-production includes some sort of tonal compression techniques aswell as split-toning and maybe some blur.

If you want to emulate this kind of look you can start with some basic curve manipulations in Photoshop. Tonal Compression works by clipping of shadows or highlights. You can achieve this by using the luminosity (RGB) channel within curves and making the curve 'less steep' (eg. taking the shadow point from input 0/output 0 to input 0 / output 18). That was probably done to Example 2 and 3, as you can see in the lack of really dark colors. Example 1 has been treated with a reverse treatment by clipping of the highlights making all the lighter colors grayish instead of full white, you can achieve this by taking the higlight point in curves (input 255 / output 255) and change it to eg. input 255 / output 214.

Split-Toning works in similar ways. Example 2 has probably been treated with the popular blue/yellow split-toning. It is achieved by manipulating the curves for the individual colors (RGB) in this case the blue channel. Switch to blue and pull the curve up in its left hand side (shadows), your dark colors should get a blue tint. Push down the curve in its right hand side (highlights), your lighter colors should get a yellow tint. You can do the same with the red and green curves to achieve different results.

You can look around the internet for different 'curve recipes', some artist share them freely. Look for example here: http://www.flickr.com/photos/rowenar/4929839059/ -- The link also shows a picture what I have been trying to explain so it should become more clear (for GIMP not PS, but it works the same way).

There are many more ways of achieving a split toning look. You can search for 'Gradient Mapping' or using solid color overlays with different blend modes (try for example a solid light blue color overlay in exclusion blend mode with an opacity of around 30, change the color to get a feeling for different looks)

For final touch of softness you can consider actually slightly blurring the picture using the gaussian blur or lens blur Filters. Apply some grain afterwards to counter the relative visible loss of sharpness.

You need to combine all these techniques in a skilled way to achieve a look like that -- or look for PS actions of which there are plenty.


I think it's a combination of a soft-focus effect, and a bit of duotone.

Also, they all seem to be fairly low-contrast, and very shallow depth of field (all f/1.8), which helps with the soft, flat feel.


He's got some Photoshop actions he sells on his blog. It looks like they mostly soften the photos, lower contrast, and maybe do some color mapping. It looks like he uses those effects on a lot of his photos.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.