I'm confused on this, even after researching:

Given 2 cameras- one full frame with 50mm lens, one Micro Four Thirds (2x crop factor) with 25mm lens, let's pretend the cameras are beside each other, ISO is set the same:

If both lenses are f2.8 for instance, does the MFT require double the exposure time to achieve the same exposure?


2 Answers 2


No. You can imagine the micro4/3 to simply cut out the middle of the image. If you had a 25mm lens on a full frame camera and exposed it properly, the middle part of the frame is part of what's exposed properly.

The definition of f-stop factors out the lens length so only f-stop and shutter speed determine the EV (exposure value). Let me make this clear: for calculating exposure, the f/stop means the same thing on any lens and format. That's what it is for: calculating the exposure. (Other effects vary with the physical aperture size and image size.)

A 50mm lens or a 25mm lens makes no difference to the EV, determined by f-stop and shutter speed. So the 25mm lens on the full frame would be the same exposure as the 50. So do that, and then crop out the center.

There are differences in the image when using different focal length lenses and different formats, but the exposure is not among them. That's the whole point if the f-number; to give you the exposure information distilled down from the detailed situation.

  • \$\begingroup\$ Thanks, this was hard to figure out, I kept thinking that a f2.8 on M43 would always really be a 5.6 equivalent when it came to light-gathering and having to do slower shutter speeds. \$\endgroup\$ Commented Jun 3, 2015 at 15:51
  • 1
    \$\begingroup\$ I just saw a video that said the f-stop is scaled with the crop factor, but keep watching as it also says the ISI is scaled as well and they cancel out w.r.t. exposure. Scaling the f-stop is a way to understand depth of field, but is not what f-stop is. Before 3tmm SLR became popular, it was normal to have different frame sizes and the understanding of what focal length meant was not tied directly to FOV, and f-stop was used as a way to abstract the lens and frame size when exposing. \$\endgroup\$
    – JDługosz
    Commented Jun 3, 2015 at 19:05

Yes and No, if exposure is the same, smaller sensors give more image noise, if you crop factor ISO and changes exposure accordingly to compensate, then you will get the same picture but different exposure.

More detailed explanation in this video:



Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.