What is the math equation to calculate the difference between two different shutter speeds in stops?


2 Answers 2


It helps to start with exactly what a "stop" means. See What is one "stop"?, but, fundamentally, each stop is a doubling or halving of the exposure.

So, given two shutter durations, you can find the number of stops between them by calculating the binary logorithm (log₂) of each, and subtracting. (If you don't remember your elementary school math very clearly, logorithms may sound complicated, but are really just counting the number of times you multiply by the same number — in this case, two.)

In formula form, that is:

$$\text{# stops} = \log_2{(\text{2nd duration})} - \log_2{(\text{1st duration})}$$

For example, we know that going from ¹⁄₃₀ to ¹⁄₆₀ is down one stop, trivially. But to work it out:

$$\begin{align} \text{# stops} &= \log_2\left({1\over60}\right) - \log_2\left({1\over30}\right) \\ &= {\sim}\,({-5.9})\; - \;{\sim}\,({-4.9}) \\ &=\quad {-1} \end{align}$$

Or for a more extreme example, from ¹⁄₁₀₀₀ to 30 seconds:

$$\begin{align} \text{# stops} &= \log_2\left({30}\right) - \log_2\left({0.001}\right) \\ &= {\sim}\,({4.9})\; - \;{\sim}\,({-9.96}) \\ &=\quad \sim 14.9 \end{align}$$

so, 15 stops. Note that it's incredibly important to not worry about excess precision. The standard scale of shutter speeds follows human-friendly numbers, not log₂, and the closest power of 2 may or may not be used internally. Overall in almost anything in photography, if it's less than a third of a stop, round it off.

If you don't have a calculator supporting \$\log_2\$, you can calculate it in the following manner:

$$ \log_2{x} = \frac{\log x}{\log 2} $$

where "\$\log\$" is logarithm in any base (2, 10, or natural logarithm, or even something else). Very often, \$\log_{10}\$ or \$\log_e\$ (in other words, \$\ln\$, or the natural logarithm) are available when \$\log_2\$ isn't.

If you don't have a calculator handy or don't want to figure out the precise \$\log_2\$, you can simply start with one speed and double or halve in your head, counting the number of times it takes before you reach the other speed. (There is no shame in keeping track on your fingers as you go if you can't both calculate and count at the same time!)

This same formula works for ISO as well, by the way. It doesn't work for aperture as expressed in f/numbers, because those numbers are related to the diameter of the aperture but exposure is based on the area (see Why are f-stops not linear?). You can calculate \$\log_{\sqrt{2}}\$ if you have a fancy calculator handy, or you can double the result after plugging the aperture numbers into the formula (and then it will work).

In practice, though, shutter speed is the only one that where a formula might be handy, because few lenses have more than a 9-stop aperture range (and many much less), most cameras only have a useful ISO range of 6 stops (maybe a bit more these days) — but with bulb mode the range for shutter speed is almost infinite. Still, exponential scales collapse quickly — the difference between ¹⁄₈₀₀₀ second and one hour is only about 25 stops, and the difference between a one hour exposure and a one year exposure only 13!

  • 2
    \$\begingroup\$ Have you considered doing a self answered post on the math for aperture sizes and f.stops? \$\endgroup\$
    – user13451
    Commented Oct 12, 2014 at 13:40
  • 1
    \$\begingroup\$ @MichaelT Not a bad idea.... we might have an appropriate question around here somewhere already — I'll look. \$\endgroup\$
    – mattdm
    Commented Oct 12, 2014 at 13:46
  • \$\begingroup\$ I didn't see it in the calculations tag. \$\endgroup\$
    – user13451
    Commented Oct 12, 2014 at 13:59
  • \$\begingroup\$ Another (easier) way to calculate the stop difference between apertures is to apply the same formula as for shutter speed, then double the result. E.g. f/2 to f/4 = (2 - 1) = 1, multiply by 2 = 2 stops. \$\endgroup\$
    – user456
    Commented Oct 13, 2014 at 17:41
  • \$\begingroup\$ @NickMiners Yes, good call. \$\endgroup\$
    – mattdm
    Commented Oct 13, 2014 at 17:53

For the standard set of shutter speeds (1 sec, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250, 1/500, 1/1000), divide the higher shutter speed by the lower, and round to 0 decimal places if necessary.

If the result is 2, it's 1 stop.

If it's 4, two stops.

If it's 8, three stops.

If it's 16, 4 stops. See the pattern?

If the shutter speed falls between the ones I gave, drop down to the shutter speed that's just longer than one of the ones I gave. Do the above calculation and then subtract half a stop.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.