1

I have a Canon 650D with 50mm budget lens. When I take photos they end up looking different than when I preview them on the LCD display. Usually they are darker and there is less bokeh.

Is this normal? Because I see little difference between the LCD and final photo with the kit lens. Are there any settings I need to adjust on the 650D for the new 50mm lens?

Improve this question
3
  • Which 50mm lens is it that you have? What is the largest aperture setting? – Guffa Feb 11 '14 at 21:40
  • 50mm f/1.8 II by canon, seems @AJ Henderson provided correct answer – Nucky Feb 11 '14 at 21:57
  • With "preview on LCD display" do you mean the preview of the photo you have just taken, or the view you see on LCD right before you take the photo? – Esa Paulasto Feb 12 '14 at 4:22
5

If I am understanding you correctly, it sounds like you are taking a photo with the aperture set to less than the smallest f/ number possible for the lens. When you use a smaller aperture (larger f/number) then the image is darker and the depth of field is bigger (resulting in a sharper background).

When you look through the viewfinder, the aperture is kept wide open so that you can see the most light. It only stops down when you actually take the photo or when you use a depth of field preview button if your camera has it; on your 650D, this is the small circular button just beneath the lens unlock button.

The image may also be darker if you are using too fast of a shutter speed.

Improve this answer
2
  • Yeah you totally right! Just checked and with f/1.8 it gives correct result. Thank you!:) – Nucky Feb 11 '14 at 21:57
  • 2
    Getting a good look through the view finder / live view has slightly different requirements than taking the photographs themselves. The aperture serves a certain purpose, so technically, even when stopped down (i.e. a larger "f number") it gives the correct result. Unfortunately, though, an unexpected one. – Cornelius Feb 12 '14 at 11:11
1

There are two main reasons why the viewfinder image may look different from the result:

  1. You are using a small aperture when taking the photo, but when you look through the viewfinder or on the LCD display the aperture is always wide open to let in as much light as possible.

  2. You are using a large aperture when takting the photo, but the viewfinder limits the light so that you see the result that you would get with a smaller aperture.

For the first case, there is a button next to the lens, that lets you stop down to the actual aperture when looking through the viewfinder. That will show you the correct DOF and focus.

For the second case, there isn't anything to do. The camera just isn't able to show a preview of how the image will look at large apertures. You can read more about it in this question.

Improve this answer
0

have you though that your LCD screen might be too bright or dark? On many cameras there is a light sensor that auto adjusts the LCD screen to the ambient light. Either check your setting to see if you can set your LCD screen manually or you could think about covering the sensor. Either way you should get to know how the images on your LCD translate to your computer and make those adjustments on your exposure I hope this helps.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.