9

I've been using a brand new Canon 5D Mark III (with the latest firmware v1.2.3) with some recent lenses (all older than the camera itself though), but most of them don't have any lens correction information available when I check in the camera's "Lens Aberration Correction" menu option.

The lenses are:

  • 35mm f/2 IS (2012) = no
  • 50mm f/1.8 II (1990) = no
  • 85mm f/1.2L II (2006) = yes

At first I thought maybe the 35mm was too new, though after checking the dates I would expect firmware to have been updated by now (~1-2 years after release).

I'm sure I've seen other cameras (e.g. a 7D) show Peripheral Illumination correction for these, so why doesn't the 5D Mark III have at least Peripheral Illumination corrections (even if not Chromatic Aberration)?

  • Similar problem with the new Canon EF 70-300mm USM IS II lens; after updating the firmware to the latest version 1.1.7 and then trying to activate the corresponding lens profile via EOS Utility, the camera menu tells me that the profile for this lens in not available. Berni, 1 June 2017 – Berni Jun 1 '17 at 9:04
15

The lens corrections aren't part of the firmware itself (i.e. a particular firmware doesn't mean you have a particular lens correction). They are profiles that can be stored in the camera, and you need to register them with the camera if they aren't in the default set.

Canon DSLRs that support lens corrections (Peripheral Illumination and/or Chromatic Aberration) only have space for a certain number of correction profiles. As far as I'm aware all Canon DSLRs that support lens corrections have space for up to 40 lens profiles, but ship with a default selection of about 25 lens profiles.

Note that most Canon DSLR models since about 2008 support in-camera Peripheral Illumination correction (DiG!C 4 or later), while in-camera Chromatic Aberration correction was introduced in models starting around 2012 (DiG!C 5 and up).

I guess these are the profiles Canon deem to be the most likely to be used. The 5D Mark III's default set are most (if not all) of their current L-series lenses (without extenders). This is why the 85mm f/1.2L II is included, but not the 35mm f/2 IS (non-L), and even the older 85mm f/1.2 (version I, no longer available) is not included by default.

In order to add/remove lens profiles, you need to

  • connect the camera to your computer via USB
  • install & run the Canon EOS Utility,
  • select 'Camera Settings/Remote Shooting' mode
  • choose 'Lens Aberration Correction' from the lens shooting menu

Here's a more detailed set of instructions from Canon's Support website.

From there you will get an interface to check or uncheck lenses for the camera to remember. Any valid combinations with the 1.4x and 2x extenders are also shown (as separate profiles to the base lens).

It's a relatively simple adjustment, but requires the Canon software and some foresight if you're going to borrow or test out a lens/body/extender.

If you forget to do this in advance, then hopefully you shot RAW photos. You can then use Canon's Lens Aberration correction to apply correction for peripheral illumination, chromatic aberration, color blur, and distortion from within their Digital Photo Professional software after the fact (to RAW files only). For RAW files made using one of 39 lenses with currently available DLO profiles you can use the more comprehensive Digital Lens Optimizer.

  • 2
    Shooting RAW also allows you to use the even more comprehensive profiles with the 'Digital Lens Optimizer' in Digital Photo Professional, Canon's RAW processing software. It can even help with diffraction caused by narrow apertures. – Michael C Jan 20 '14 at 5:20
  • 1
    Models older than 2010 also support some of the lens profile capabilities. The chart on the link lists "current models only". So the 5DII, 50D, etc. do have the feature even though they are not listed. Other than Rebels, every Canon DSLR I've owned from the 50D on includes Peripheral Illumination Correction. – Michael C Jan 20 '14 at 5:52
  • Canon EOS Utility just says "busy" after clicking "Lens aberration correction" :-( There's some error going on :-( – Curious May 23 '16 at 14:15

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.