I want to remove the strap rings on my Nikon D7000. They look to be pretty standard triangular split rings, but they also have a little plastic cover on them. How do I safely remove the cover in such a way that I can put the ring and the cover back on later if so desired? After some examination, it looks like I could just pry it off, but it would be nice to know if anybody's has experience with this before, so I don't screw it up.
2 Answers
I have done this on my D800, I assume they are exactly the same.
So first remove the plastic clips, just push them HARD towards the on-camera mounting post, they should just pop off.
Then remove the triangular rings, they are VERY stuff so you may need a flat-head screwdriver to pry the end open, just rotate them around like a key-ring and off they come.
I NEVER use a strap, and these are very annoying jiggling about all the time...
-
\$\begingroup\$ I ended up going with a strap that uses the split rings, so I'm no longer trying to wrestle them off, but thanks for the info! \$\endgroup\$ Commented Dec 15, 2013 at 2:50
-
\$\begingroup\$ I didn't like the OpTech strap I got, so I switched to a BlackRapid. Once again, I didn't need the strap rings, so I pushed down on the plastic clip and it came right off. Thank you! \$\endgroup\$ Commented Jan 25, 2014 at 7:33
If "push them HARD towards the on-camera mounting post" reads like alien language to you, here's a Youtube video showing how to remove the rings. https://www.youtube.com/watch?v=5lRqfZU7Gzg