# How can I take a clear picture of an object which is in relative motion opposite to my motion?

What are the possibile ways to take a picture of an object which is in relative motion opposite to my motion?

Let's say I am on a running train and another train is coming just opposite to my direction at the same speed. Now, I want to take a perfect picture of that train or anything that are thrown from that train.

I want the thrown object or other train clear in my picture. How can I edit or take the pciture so that it will be clearly visible, as much as possible?

There's nothing magical here. Your relative motion will be the speed of your train plus the speed of the object moving towards you. It depends on how fast both trains are going, but it's really the same as if you were standing still and the train were going past you.

You need:

1. A high shutter speed to freeze motion
2. Incredible timing. A high burst rate is probably your best option here, especially with the thrown object.

Speed.

You need to use a very short shutter speed to freeze motion. In order to use a short shutter speed, you need enough light, a lens with a wide enough aperture, and a recording medium, such as fast film or a sensor with high enough sensitivity to properly expose your subject when using a short enough shutter speed.

In terms of still photography relative motion is measured by the angle of the subject's motion relative to the camera's field of view for a given length of exposure. In your train scenario you have described the 'perfect storm' of relative motion: The camera is moving one direction along an axis perpendicular to the optical axis and the subject is moving the same speed in the opposite direction. In order to get a picture of that train or an object thrown from it you would need an exposure time short enough that no perceptible details of the subject's image projected on the sensor move more than the width of a single pixel in the camera's sensor. Obviously, the faster each train is moving the shorter the shutter speed (Tv for time value) would need to be.

Most advanced digital cameras are capable of a shutter speed of 1/8000 sec. The problem with most of these is that although each portion of the sensor is only exposed to light for 1/8000 sec, the exposure is done as a narrow slit between shutter curtains travels in front of the sensor. Even at 1/8000 sec in conventional cameras it takes approximately 1/250 sec to 1/500 sec for this slit to travel across the entire sensor. So what is visible at the bottom of a frame exposed for 1/8000 sec happened 1/250 sec before what is visible in the top of the frame. If your subject moved within the frame during this time the shape of your subject will be distorted. Even cameras without a mechanical shutter usually scan the sensor electronically one row at a time. For your scenario it would be easiest to capture the required subject using a type of sensor that scans the entire sensor at the same time. Many machine vision cameras use such a sensor.

You then must consider how the subject will be properly lit to provide enough light for such a short exposure. Direct sunlight is probably enough if you also have a lens with a fairly wide aperture. The issue with using a wide aperture is that the depth of field (DoF) will be fairly narrow so that accurate focus becomes critical. You would probably need a way to measure or figure the distance to your subject ahead of time and pre-focus the lens to that distance. In the case of two trains passing one another on a straight stretch of tracks the rails are likely at a constant distance apart and the distance could be measured taking into account the position of the camera on one train and the position of the subject on the other relative to the rails.

• hmmm...it is also a helpfull vote up man – Rajarshi Das Aug 30 '13 at 12:56
• You might find a greater number of varied responses if you would refrain from choosing a selected answer less than three hours after you ask a question. This group is a global community with regular contributors from locations ranging from New Zealand and Australia, to East Asia, Central Asia, Europe, and North America. Once a question has an accepted answer there is less incentive for others to contribute an answer. Much of the pool of possible responders probably didn't even see the question before you had accepted an answer. – Michael C Aug 30 '13 at 13:09

Well, either a fast shutter speed or you can match the angular velocity with a quick panning (takes practice).

Here I was standing rather than moving in the opposite direction, but you get the idea:

• I was going to suggest panning ot follow the subject. This is classic approach for shar subject with motion blurred background. – David Goldwasser Aug 30 '13 at 13:44
• If the relative angular momentum is fast enough though, the perspective shift alone will distort the image pretty significantly. Speed of exposure is still going to be pretty critical. – AJ Henderson Aug 30 '13 at 13:58
• I'm a fan of a whip-pan following the subject motion as above photos suggest and a fast shutter speed or use a slower shutter speed with a speedlight as the main illumination. Oh, and a gadget-bag full of luck. – Stan Aug 30 '13 at 20:43