I took some shots recently and I noticed that I'm getting a lot of little black dots in my images.

I cleaned my lens thoroughly with the Nikon camelhair brush and retook the pictures but once again, the dots appear.

I'm shooting with a Nikon D7000 and using a starter lens. I've attached an example (notice the black spots on the chairs, on the ceiling, etc).

Kitchen with black dots

  • Does this answer your question? How can I avoid soft dull “spots” in my pictures?
    – Joanne C
    Aug 21, 2013 at 17:21
  • 3
    Just seeing that made me reflexively grab my rocket blower. Aug 21, 2013 at 17:38
  • A good question might be, why are you shooting at such apertures indoors?
    – dpollitt
    Aug 21, 2013 at 23:04
  • If you're sure there weren't cockroaches running around, then it's probably oil splatter from the shutter mechanism on the sensor. Aug 27, 2013 at 15:05
  • But it doesn't happen with every picture. It happens unpredictably. Aug 27, 2013 at 16:39

5 Answers 5


Nikons have a reputation of coming from the factory with a little too much oil on the shutter mechanisms. Some of the excess oil eventually finds its way onto the sensor. What you are seeing in your photos is the shadow of the oil (and the dust stuck to it) on your sensor. You will probably have to go through several cycles of cleaning your sensor before the problem will gradually go away. Any type of dust spots on the sensor (actually on the IR filter in front of the sensor) will be darker, sharper, and more noticeable when shooting with narrower apertures than when shooting with wider apertures.

For more on why dust spots are darker and sharper using narrower apertures, see Question About the D600 Dirty Sensor Test - Why Use a High f-Stop? and Why use a small aperture when trying to see sensor dust?

As to how to clean you sensor, please see What is the best way to clean the sensor on a digital SLR?

  • I have also had the same problem with the D7000, in fact with all off my nikon cameras including the one I have now which is the D610. I started getting oil marks on my pics within two weeks of buying it brand new.I am seriously looking at changing to Cannon now as I have had enough of my shots being ruined.
    – user38589
    Mar 20, 2015 at 23:39
  • These are not "oil stains", they are plainly dust on the sensor. Oil stains are subtle and not defined. You may perceive a change in colour or contrast, but not a defined dark dot or any other form. Dust or particles on the sensor appear well defined. Dust or particles in the lenses appear blurry, and if they are located far from the focal plane they get more diffused or barely perceived at all.
    – roetnig
    May 16, 2017 at 14:46
  • @roetnig I don't suppose dust would ever stick to an oil drop on the sensor stack and stay stuck there even when the self-cleaning routine that would be sufficient to shake dry dust off is run, would it?
    – Michael C
    May 16, 2017 at 21:55
  • "Dust or particles on the sensor appear well defined." Most dust is not actually on the surface of the sensor, it is on the surface of the sensor stack 1-2 mm or more in front of the sensor, as is well covered in my answer to the first link in the above answer. Also covered in answers to both links is that how well defined it will be is affected by the aperture used since that affects how collimated the light striking the sensor is.
    – Michael C
    May 16, 2017 at 22:21
  • If you want a really good story about how things a good distance from the sensor plane don't affect the image much, follow the link to Roger's blog post included in this answer
    – Michael C
    May 16, 2017 at 22:22

Looks like really bad dust on the sensor maybe or even a bad sensor. Do the spots stay in the same place? Issues with the lens wouldn't produces such defined issues because light from each pixel comes from multiple parts of the lens. I would suggest trying to clean the sensor or sending it to Nikon to have it cleaned professionally. If that doesn't work, then it is probably bad pixels in the sensor itself, but it is almost certainly dust or dirt.


I don't think it's bad pixels because the dots seems out of focus and not a single pixel that is not working. Here is a link that you can follow to verify if you sensor is really dirty: http://photo.net/equipment/dslr-sensor-cleaning/

If it is dirty you should look for a tecnical. Sensor is very delicate and I wont recommend you to try by yourself.

here is an example of a dirty sensor.


I too had this exact issue on my 7000. I took it to Nikon UK and they cleaned it for me (the sensor) FOC, but made no comment as to what it was. Since then, two years on, I have had to learn to clean it my self, so its worth buying the right stuff to do it with, with a loupe etc. Its not difficult but saves you money.

I understand that it is iol from the shutter and tends to show itself when using CH or CH settings.


That really does look like sensor dust but I've never seen a case where it's so severe. Do you change your lens frequently? My advice would be to always orient your camera so the mount is facing down as you change your lens to lessen the possibility of getting dust and not to change lenses in dusty environments.

The good news is that cleaning the sensor isn't nearly as scary as it sounds, but you do need to take a conservative approach to it. Use an air blower first, check the result, repeat again and only use tools that make contact with the sensor if a combination of an air blower (I really like Giotto's Rocket Air Blaster) and the camera's sensor cleaning mode aren't enough to get it clean.

Not the answer you're looking for? Browse other questions tagged or ask your own question.