I’m considering the Nikon F75 for a film project requiring multiple exposures per frame.
Does the Nikon F75 have a mode where the frame does not advance, for an arbitrary number of multiple exposures on the same frame?
From the manual (page 70, takes a while to load), it is clear that creating multiple exposures with more than 2 frame is possible:
To take more than two shots on the same frame, rotate the Command Dial while pressing the [bkt] button again after the first shot is taken ...
But it’s not clear to me if it is always necessary to “prep” each additional exposure on the same frame with a manually pressing the [bkt] button as described.
I would like to use the same frame for (more than 2) multiple exposures, unattended, with a remote trigger.
Can the F75 be set in a mode, where the frame does not advance at all between exposures?