5
\$\begingroup\$

There are 3 controllable rings on the CCTV lens. Each ring has 2 characters on them with the ring farthest from the sensor being F and N. Next is O and C. The last ring is T and W.

What does each of these characters represent? The O and C controls the aperture, so I'm assuming it stands for open and close. I'm guessing the F and N stands for far and near. I have to adjust that and the W and T ring for the camera to focus.CCTV Lens

\$\endgroup\$

2 Answers 2

25
\$\begingroup\$

"W"ide and "T"elephoto - i.e. they will control the zoom - as opposed to "N"ear and "F"ar which control the focus.

\$\endgroup\$
2
  • 12
    \$\begingroup\$ O for Open, C for Closed? \$\endgroup\$ Commented May 31, 2023 at 20:02
  • 2
    \$\begingroup\$ I believe so. The diaphragm opens up and closes in relation to that particular ring. \$\endgroup\$
    – Neoprism
    Commented May 31, 2023 at 20:25
5
\$\begingroup\$

The descriptive text on the lens says "2.8-12mm" so this is a zoom lens. Therefore you have three controls, aperture, focus and zoom.

I would be pretty sure that the markings are

  • Wide/Telephoto (zoom)
  • Open/Closed (aperture)
  • Near/Far (focus)

On most lenses there is some cross-coupling between the focus and zoom. Changing one will have some effect on the other.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.