1
\$\begingroup\$

Hey guys so I’m pretty new to the film/analog photography. I took some pictures in my London trip got them developed and they all came out foggy and I can’t see anything. I would appreciate some help or tips so next time I won’t make the same mistake I use the Yashica FX-Dse quartz my film I used was Fujicolor 200 enter image description here

\$\endgroup\$
4
  • 3
    \$\begingroup\$ Have you ever shot a successful roll of film with this camera? What conditions were you shooting in? That is, was it outdoors in sunlight? Dark interiors? A mixture? Do you understand the exposure triangle? What aperture setting(s) were you using? Did the shutter sound to you like it was operating normally? \$\endgroup\$
    – osullic
    Commented Apr 2, 2023 at 15:57
  • 1
    \$\begingroup\$ What do the edges of your negative show? The frame numbers and the film type are always easily readable unless there was a problem with development... \$\endgroup\$
    – BobT
    Commented Apr 2, 2023 at 17:34
  • \$\begingroup\$ @BobT I don’t have my negative yet since I got the picture send today from the developer:) \$\endgroup\$
    – Shalin
    Commented Apr 2, 2023 at 19:57
  • \$\begingroup\$ @osullic Yes I did so I was confused, it was outdoors but the sun was shining my exposer settings where on 200 (since I was outdoors) and yes the shutter was operating normally \$\endgroup\$
    – Shalin
    Commented Apr 2, 2023 at 19:58

1 Answer 1

3
\$\begingroup\$

That looks like a processing problem -- it's what I'd expect to see if the bleach or fixer steps in lab processing didn't happen.

If you have the negatives, and assuming they show a milky surface with the color image superposed on it, you should take them back to the lab that did the processing (or another lab you trust) and ask them to rerun only the bleach and fix part of the process.

Of course, if you processed these yourself, using a C-41 kit, your blix is dead; rerunning only the blix step of the process with fresh solution will correct this problem.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.