0

I know that smartphones have a LED "flash" which is not really a real flash that would produce a very intense short-lived pulse of light, but rather is a continuous light that is turned on before the exposure begins and turned off when the exposure ends, and the exposure times are typically long.

I do know that most smartphones have an about 50 lumen LED light and that typical smartphone focal lengths are about 28mm if multiplied with the crop factor to get a 35mm equivalent focal length.

But how do I determine the guide number of a smartphone LED "flash" from these?

2 Answers 2

1

The guide number of a flash is determined as the F-number multiplied by the distance that gives a proper exposure. The guide number is different for different ISO sensitivities, but they are typically given for ISO 100, and when calculating a guide number for e.g. ISO 3200, you calculate:

GN3200 = sqrt(3200/100)*GN100

and similarly for other ISO sensitivities.

Smartphone flash guide numbers are peculiar in that they are not only affected by the ISO number but also affected by the exposure time. For example if you have GN_{100,10} for ISO 100 and 1/10 second exposure time, and want to know GN_{400,5} for ISO 400 and 1/5 second exposure time, you calculate:

GN_{400,5} = sqrt(10/5)*sqrt(400/100)*GN_{100,10}

Let us determine GN_{100,10} first and then other exposure times and ISO sensitivities can be calculated from that.

Let us fix the subject to be 1 meter away from the smartphone camera and let us consider an f/1 lens (fairly unusual for smartphones but F-number will be accounted for later), which would give a guide number of 1 meter. A field of view calculator gives image dimension of 1.2857 x 0.85714 units for a subject 1 unit away if the focal length is 28mm and the image format is 3:2 (usually smartphones might have a differently shaped image sensor, but this shouldn't affect the calculations much because the crop factor is based on comparing the diagonal).

We also need to know about exposure value. For f/1 lens and 1/10 second exposure time, the exposure value is

log(1.0^2 / 0.1)/log(2) = 3.3219

Also we know that exposure value of 0 corresponds to 2.5 lux (from that Wikipedia article), so exposure value of 3.3219 corresponds to 25 lux.

If the smartphone manufacturer has modified the LED optics to produce an even light field for the field of view of the camera lens, the smartphone flash produces an illuminance of

50 lm / (1.2857 m * 0.85714 m) = 45.371 lm/m^2 = 45.371 lux

So we have

45.371 lux / 25 lux = 1.8184

times as much light as we would need. This means guide number is not 1 meter as we initially assumed but rather

sqrt(1.8148) * 1 m = 1.3471 m

If the smartphone has a different ISO sensitivity (let's say 400), a different 35mm equivalent focal length (let's say 32 mm), a different exposure tame (let's say 1/5 s) and a different brightness LED (let's say 70 lm) then we can take into account these corrections to the guide number:

GN_{400,5,32mm,70lm} = 35mm/28mm * sqrt(70lm/50lm) * sqrt(400/100) * sqrt(10/5) * GN_{100,10,28mm,50lm}
= 4.1833 * GN_{100,10,28mm,50lm}
= 4.1833 * 1.3471 m
= 5.6353 m

Some comparisons for the guide number:

  • A professional Canon EL-1 flash has an ISO100 guide number at 24mm of 19 m (this is measured, advertised is 27 m) and at 35mm of 24 m (this is measured, advertised is 32 m)
    • To convert 24mm guide number from 24mm to 28mm (assuming a perfect light distribution), you would calculate (28/24)^2*19 m = 25.9 m
    • To convert 35mm gide number from 35mm to 28mm (assuming a perfect light distribution), you would calculate (28/35)^2*24 m = 15.4 m
  • A very small Canon flash EL-100 has an ISO100 guide number at 24mm of 21 m (advertised; measured would probably be 19/27 * 21 m = 14.8 m)
    • To convert 24mm guide number from 24mm to 28mm (assuming a perfect light distribution), you would calculate (28/24)^2*14.8 m = 20.1 m
  • A typical DSLR built-in flash has an ISO100 guide number of 12 m; not sure if this is measured or advertised, but if it's advertised the measured probably would be 19/27 * 12 m = 8.4 m as advertised guide numbers are typically much larger than measured guide numbers

Compared to these, the smartphone guide number of 1.3471 m is very poor and also to achieve that 1.3471 m, you need 1/10 second exposure time which means a shaken picture unless the smartphone is equipped with an image stabilizer, and also may mean you get motion blur unless the subject is perfectly still. So the smartphone flash is only useful at very near ranges in a very dark environment such as levels of light during streetlight periods, or in a very dark room. Also in macro photography in general home light levels the LED of a smartphone may be helpful.

2
  • Since this is an explanatory detailed answer, I would elaborate why the phone flash is "also affected by the exposure time". (My understanding is that because a normal flash pulse is shorter than any (allowed) exposure time, while the phone's flash lights the scene during the whole exposure).
    – Zeus
    May 9 at 0:38
  • Well I did mention it already in the question: turn LED on, begin exposure, end exposure, turn LED off.
    – juhist
    May 9 at 17:11
0

For a continuous light, "guide number" is variable based on the duration of the shutter. The longer the shutter stays open while a continuous light is turned on, the brighter the image will be. Thus, there is no effective way to rate a continuous light with a static "guide number" unless the shutter duration is specified and invariable.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.