0

I am using Sony a6500 but I have Godox V860 ii C and Godox X1T C trigger. Can I use this flash and trigger on my Sony camera for high-speed sync? Will it work? If yes, how to do it?

  • What is the shape of the pattern of contacts on your camera's hot shoe? How about the contacts on the bottom of your trigger's hot foot? How can ypu expect them to work seamlessly when the connectors do not match? – Michael C Jan 29 at 21:22
  • @mattdm, I don't disagree with your edits here, but be aware that Robert Hall is calling tail syncing "hi-sync", so it may be that "high sync" in this case isn't about HSS. I'd say you're most likely correct, tho. – inkista Jan 30 at 3:58
1

If you need TTL/HSS, then whatever goes on the hotshoe of the camera has to have a matching flash foot that has all the contacts required for electronic communication. So, the V860II-C or the X1T-C will not work with full function on the Sony multi-interface hotshoe of the α6500. Only the -S versions will. With the -C versions, you will get triggering, and probably M power control if the X1T is placed into single-pin mode (Fn 01 = on). But HSS, if you meant high-speed sync, and not tail-syncing (aka hi-sync, hypersync, supersync, overclock sync, etc.) is probably not going to work.

You can, however, use the V860II-C as an off-camera TTL/HSS/remote power control radio slave to an X1T-S (or, better yet an XPro-S or R2 Pro II-S), so long as its firmware is at v1.4 or later. (See also: How do I tell if my Godox trigger or flash needs a firmware update?)

0

related: Are any of the common third-party flash systems with radio-trigger capability inofficially multi-platform?

TL;DR: You might need to update the firmware in the V860II, and purchase an additional and correct trigger.

0

Full compatibility

To use all the flash modes and features, your a6500 will require the X1T-S version of the trigger. In the same vein, the V860II-C cannot fully work when directly mounted on the Sony a6500 hot-shoe. You will need the V860II-S version for that.

In case you want to be fully compatible at low cost, the V8600II-C will work seamlessly with a X1T-S trigger on your a6500 (ttl, hss and all).

Working with your current gear

The only mode that will work with your current gear is the "single contact mode". You will need to set the Godox X1T-C to single contact mode (Fn1=on, see the X1T-C user manual page 38) and pair it with V860II-C in manual mode. Set the Sony a6500 to fill flash (see online manual here).

Flash power can then be adjusted manually on the X1T-C (or on the V860II-C for that matter). Of course, you won't have any automatic feature working. But at least, it will flash.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.