1

This question already has an answer here:

I have a Canon 4000D and I would like to take some long exposure photography. It only allows shutter speeds up to 30 seconds and I would prefer to have the ability to take shots that are exposed for 1 minute or more. Is it possible? I'm OK with using 3rd party software like CHDK if I have to.

|improve this question

marked as duplicate by Michael C canon Jan 14 at 18:35

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

  • Have you looked at MagicLantern? Are you opposed to the simple method: a remote shutter release? There are simple models that simply lock the button down and fancier ones where the exposure is set in the release. – Hueco Jan 14 at 16:48
  • Slightly different camera model, same question and same answer. – Michael C Jan 14 at 18:35
  • @MichaelC Maybe the other question can be modified to cover both, now it is not the same question. – Orbit Jan 14 at 22:10
  • @Orbit How do the two questions differ? – Michael C Jan 15 at 1:04
  • @MichaelC Because it is about a different camera model, and people may not know the answer is the same. But I just learned that most duplicates won't be deleted, so nevermind. – Orbit Jan 15 at 18:01
2

It is not possible to select exposure times longer than 30 seconds on most DSLR's.

If you want an exposure time longer than 30 seconds, you have to use "Bulb" mode. You set the camera to bulb mode, and hold the shutter button as long as you want your exposure to be. Because this is not very convenient, most people use a remote control to open and close the shutter. This can be a wired remote, a wireless remote control or a telephone app(although one could say that that is also a wireless remote).

|improve this answer
  • You can get a IR remote for most Canon models for $10-$30. – Robin Jan 14 at 17:48
  • 1
    You can get a wired remote that works much better for most use cases for about $5. You can get a wired remote with built-in intervalometer for $15. – Michael C Jan 14 at 18:33
  • Cheap Chinese IR remotes for 5 dollar also seem to work just fine ;) I think the 4000D also has wifi built in. Maybe a free Canon app will do the trick too. – Orbit Jan 14 at 18:35
  • An IR remote is not unlikely to drain its battery real quick if used that way ... and stray infrared can be a problem with long exposures. – rackandboneman Jan 14 at 20:19
  • @rackandboneman I always use an IR remote. I press once to open the shutter, and once to close. I use Nikon though, no idea how it works on other brands. – Orbit Jan 14 at 20:38

Not the answer you're looking for? Browse other questions tagged or ask your own question.