2 added 124 characters in body; added 99 characters in body
source | link

I typically use aperture priority as well, but I also work a fair bit in manual mode. The typical case for me is if I am in an environment where the lighting situation is quite static, but the subject may have a lot of contrast. Here I switch to manual mode and shoot a few test frames to pinpoint the exposure (typically I try to spot meter on a white surface, and then overexpose that reading by 1.5-2 steps as a first guess).

The main advantage is that you are in full control, and the camera will not be "fooled" by unexpected contrasts in the frame. The downside is that it is a bit slower to change exposure in case the lighting situation changes.

I typically use aperture priority as well, but I also work a fair bit in manual mode. The typical case for me is if I am in an environment where the lighting situation is quite static, but the subject may have a lot of contrast. Here I switch to manual mode and shoot a few test frames to pinpoint the exposure (typically I try to spot meter on a white surface, and then overexpose that reading by 1.5-2 steps as a first guess).

I typically use aperture priority as well, but I also work a fair bit in manual mode. The typical case for me is if I am in an environment where the lighting situation is quite static, but the subject may have a lot of contrast. Here I switch to manual mode and shoot a few test frames to pinpoint the exposure (typically I try to spot meter on a white surface, and then overexpose that reading by 1.5-2 steps as a first guess).

The main advantage is that you are in full control, and the camera will not be "fooled" by unexpected contrasts in the frame. The downside is that it is a bit slower to change exposure in case the lighting situation changes.

1
source | link

I typically use aperture priority as well, but I also work a fair bit in manual mode. The typical case for me is if I am in an environment where the lighting situation is quite static, but the subject may have a lot of contrast. Here I switch to manual mode and shoot a few test frames to pinpoint the exposure (typically I try to spot meter on a white surface, and then overexpose that reading by 1.5-2 steps as a first guess).