Timeline for Can I trigger the RF-603 (and thus, flash), via PC/other cable?
Current License: CC BY-SA 4.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 6, 2020 at 21:54 | history | edited | inkista | CC BY-SA 4.0 |
Removed TriggerTrap as that's no longer a solution (sigh), and threw in the Godox transmitter as having a sync input.
|
| Jan 27, 2016 at 18:22 | history | edited | inkista | CC BY-SA 3.0 |
Added corded solution provided by WayneF.
|
| Jan 27, 2016 at 18:19 | comment | added | inkista | @WayneF good thought. I'll add it to my answer. | |
| Jan 27, 2016 at 5:52 | comment | added | WayneF | The PC sync cord would plug directly into the flash unit. It does not need the radio trigger. You can get an inexpensive Y connector to connect PC cord to both flashes. | |
| Jan 27, 2016 at 5:02 | comment | added | technotron101 | I was thinking that because the camera hotshoe triggers the flash or trigger via the pins, if I used a hotshoe cable from the acoustic trigger, then I would be able to achieve the same as if the trigger was on the camera, right? | |
| Jan 27, 2016 at 4:36 | comment | added | inkista | @technotron101 Well, I'm sure there are other solutions. That's just the one I know about. | |
| Jan 27, 2016 at 4:31 | comment | added | technotron101 | I'm an android man... Too bad the PC sync port can only be used for output 😢 | |
| Jan 27, 2016 at 4:25 | history | answered | inkista | CC BY-SA 3.0 |