2 fix typo; nitpick about punctuation while I'm at it. :)
source | link

Since this is a homework question I prefer not to give a direct answer (especially as there is a near duplicate), but as I read it, the task set is "what is the best way that you can think of to do this". It is not "what is the bare minimum/cheapest way to do this" On that basis, these are some questions you may want to ask yourself about the answer given...

Were you not going to bring a camera? While specific models are inappropriate for a learning environment, what type would you bring considering that accuracy and resolution are likely to be your primary goals. (Hint: DLSRDSLR is not the only kind of camera,camera; something else may be more appropriate.)

How are you going to maintain the requirement for colour accuracy?

You've specified a portable studio flash kit, should you be more specific? How many heads, how powerful and will you need light modifiers?

How will you handle unwanted reflections from your own lighting? (noteNote: CPL'sCPLs can alter colours in some media and how will they work with flashes, there's. There's another method that you may need to consider and a type of lens dedicated to the task.) What about light from other sources?

Using primes is a good idea from the image quality point of view. But are 20mm and 135mm the right primes to use? (Hint: there is a commonly used length which naturally offers exceptionally low distortion - should you include that too?)

While DOF is not an issue, sharpness is, is. Is there a factor of your lenses which needs to be considered?

Are there other pieces of equipment that would help you ensure that you've captured the image correctly (after bringing in and setting up all that studio flash gear?) before you move to the next piece?

All that equipment doesn't move by itself - will you be able to do it alone? And if you could, should you?

Since this is a homework question I prefer not to give a direct answer (especially as there is a near duplicate), but as I read it, the task set is "what is the best way that you can think of to do this". It is not "what is the bare minimum/cheapest way to do this" On that basis, these are some questions you may want to ask yourself about the answer given...

Were you not going to bring a camera? While specific models are inappropriate for a learning environment, what type would you bring considering that accuracy and resolution are likely to be your primary goals. (Hint: DLSR is not the only kind of camera, something else may be more appropriate.)

How are you going to maintain the requirement for colour accuracy?

You've specified a portable studio flash kit, should you be more specific? How many heads, how powerful and will you need light modifiers?

How will you handle unwanted reflections from your own lighting? (note: CPL's can alter colours in some media and how will they work with flashes, there's another method that you may need to consider and a type of lens dedicated to the task.) What about light from other sources?

Using primes is a good idea from the image quality point of view. But are 20mm and 135mm the right primes to use? (Hint: there is a commonly used length which naturally offers exceptionally low distortion - should you include that too?)

While DOF is not an issue, sharpness is, is there a factor of your lenses which needs to be considered?

Are there other pieces of equipment that would help you ensure that you've captured the image correctly (after bringing in and setting up all that studio flash gear?) before you move to the next piece?

All that equipment doesn't move by itself - will you be able to do it alone? And if you could, should you?

Since this is a homework question I prefer not to give a direct answer (especially as there is a near duplicate), but as I read it, the task set is "what is the best way that you can think of to do this". It is not "what is the bare minimum/cheapest way to do this" On that basis, these are some questions you may want to ask yourself about the answer given...

Were you not going to bring a camera? While specific models are inappropriate for a learning environment, what type would you bring considering that accuracy and resolution are likely to be your primary goals. (Hint: DSLR is not the only kind of camera; something else may be more appropriate.)

How are you going to maintain the requirement for colour accuracy?

You've specified a portable studio flash kit, should you be more specific? How many heads, how powerful and will you need light modifiers?

How will you handle unwanted reflections from your own lighting? (Note: CPLs can alter colours in some media and how will they work with flashes. There's another method that you may need to consider and a type of lens dedicated to the task.) What about light from other sources?

Using primes is a good idea from the image quality point of view. But are 20mm and 135mm the right primes to use? (Hint: there is a commonly used length which naturally offers exceptionally low distortion - should you include that too?)

While DOF is not an issue, sharpness is. Is there a factor of your lenses which needs to be considered?

Are there other pieces of equipment that would help you ensure that you've captured the image correctly (after bringing in and setting up all that studio flash gear?) before you move to the next piece?

All that equipment doesn't move by itself will you be able to do it alone? And if you could, should you?

1
source | link

Since this is a homework question I prefer not to give a direct answer (especially as there is a near duplicate), but as I read it, the task set is "what is the best way that you can think of to do this". It is not "what is the bare minimum/cheapest way to do this" On that basis, these are some questions you may want to ask yourself about the answer given...

Were you not going to bring a camera? While specific models are inappropriate for a learning environment, what type would you bring considering that accuracy and resolution are likely to be your primary goals. (Hint: DLSR is not the only kind of camera, something else may be more appropriate.)

How are you going to maintain the requirement for colour accuracy?

You've specified a portable studio flash kit, should you be more specific? How many heads, how powerful and will you need light modifiers?

How will you handle unwanted reflections from your own lighting? (note: CPL's can alter colours in some media and how will they work with flashes, there's another method that you may need to consider and a type of lens dedicated to the task.) What about light from other sources?

Using primes is a good idea from the image quality point of view. But are 20mm and 135mm the right primes to use? (Hint: there is a commonly used length which naturally offers exceptionally low distortion - should you include that too?)

While DOF is not an issue, sharpness is, is there a factor of your lenses which needs to be considered?

Are there other pieces of equipment that would help you ensure that you've captured the image correctly (after bringing in and setting up all that studio flash gear?) before you move to the next piece?

All that equipment doesn't move by itself - will you be able to do it alone? And if you could, should you?