I am using a YN 568EXIII flash, and whenever I try to use it in 1/16 or higher outputs (1/8, 1/4, 1/2, etc.), it looks like my photos are ignoring the YN 568 light.

When I fire it using 1/32 and lower outputs (1/64, 1/128), I get nice results.

My gear is: Nikon, D7200, Nikkor 50m 1/1.4 g

Right below, I inserted some sample images to illustrate what I am talking about.

All the pictures were taken using the same camera settings in manual mode: f/5,6, 1/200, ISO 100.

For the flash settings I am using slave mode (S1) and testing different light outputs.

What is causing this dark photos at 1/16 and up and how can I avoid that?

Thanks in advance :)

I am using a YN 568EXIII flash, and whenever I try to use it in 1/16 or higher outputs (1/8, 1/4, 1/2, etc.), it looks like my photos are ignoring the YN 568 light.

When I fire it using 1/32 and lower outputs (1/64, 1/128), I get nice results.

My gear is: Nikon, D7200, Nikkor 50m 1/1.4 g

Right below, I inserted some sample images to illustrate what I am talking about.

All the pictures were taken using the same camera settings in manual mode: f/5,6, 1/200, ISO 100.

For the flash settings I am using slave mode (S1) and testing different light outputs.

What is causing this dark photos at 1/16 and up and how can I avoid that?

Camera flash settings:

Thanks in advance :)

I am using a YN 568EXIII flash, and whenever I try to use it in 1/16 or higher outputs (1/8, 1/4, 1/2, etc.), it looks like my photos are ignoring the YN 568 light.

When I fire it using 1/32 and lower outputs (1/64, 1/128), I get nice results.

My gear is: Nikon, D7200, Nikkor 50m 1.4G.

Right below, I inserted some sample images to illustrate what I am talking about.

All the pictures were taken using the same camera settings in manual mode: f/5,6, 1/200, ISO 100.

For the flash settings I am using slave mode (S1) and testing different light outputs.

What is causing this dark photos at 1/16 and up and how can I avoid that?

Thanks in advance :)

I am using a YN 568EXIII flash, and whenever I try to use it in 1/16 or higher outputs (1/8, 1/4, 1/2, etc.), it looks like my photos are ignoring the YN 568 light.

When I fire it using 1/32 and lower outputs (1/64, 1/128), I get nice results.

My gear is: Nikon, D7200, Nikkor 50m 1/1.4 g

Right below, I inserted some sample images to illustrate what I am talking about.

All the pictures were taken using the same camera settings in manual mode: f/5,6, 1/200, ISO 100.

For the flash settings I am using slave mode (S1) and testing different light outputs.

What is causing this dark photos at 1/16 and up and how can I avoid that?

Thanks in advance :)