Hot answers tagged alternative
It's a process similar to that used to photographically create screen prints (serigraphs). A UV-photosensitive water-soluble emulsion (typically gelatin sensitized with potassium dichromate) containing a pigment (in this case, carbon or lamp black) is used to coat a surface. The emulsion hardens under exposure to strong UV, becoming more-or-less insoluble ...
Most modern large-format plotters used by specialist print companies can print on a variety of surfaces, including canvas, acetate, and Tyvek. I would think your best option is to print onto acetate (transparency) and fix that to the canvas board somehow, perhaps on top of or embedded in the resin you mentioned.
As others have mentioned, I recommend using a quick release system for your standard strap. The one I use is a Tamrac N-15 and, when disconnected, it leaves behind a minimal amount of strapping that stays mostly out of the way. For your BlackRapid (or any sling strap for that matter), I use a tiny, 1-inch, Arca Swiss clamp made by Kirk Enterprises. This ...
You can attach these to your camera's attachment points, then loop the ends of your strap through the detachable ends. I've not used them, but they are supposed to be rated for 44lbs static weight. You could also make this DIY hook to attach your regular neck strap to the Black Rapid connector. If you want to use a Manfrotto RC2 plate with the Black Rapid ...
Only top voted, non community-wiki answers of a minimum length are eligible