Before the rush

Before the rush
by evan-pak

Submit your Photo
Hall of Fame

Please participate in Meta
and help us grow.

YongNuo Photographic Equipment is a chinese manufacturer of camera accessories

learn more… | top users | synonyms

2
votes
2answers
38 views

Doesn't Yongnuo YN685 speedlight have different part numbers for Canon and Nikon?

622C-tx controller is for Canon cameras and E-TTL compatible. 622N-tx controller is for Nikon cameras and I-TTL compatible. I presume that the suffix 'C' and 'N' are representative of respective ...
1
vote
1answer
32 views

Can you control YN560 IV speedlights using a SB-700 in the hotshoe mount as a master?

I have a SB-700 speedlight and I would like to buy a few YN560 IV speedlights. With other Nikons, I could control them with the SB-700 on the camera hotshoe using Master mode. Can you do 100% ...
0
votes
1answer
45 views

How do I get rear-curtain sync on a Canon 5D classic with a Yongnuo YN-500EX?

I have a Canon 5D classic and a Yongnuo YN-500EX and I'd like to take rear curtain sync photos with it but I can't seem to make it work. The flash has this function, I can turn it on and see it being ...
0
votes
1answer
10 views

Does the YN-560TX model support the YN560 IV flash?

I purchased a YN560TX a few months ago, today I purchased a YN560 IV. Upon reading the product description I noticed something that was never a problem before: Missing Yn560 IV compatibility. Can ...
2
votes
2answers
61 views

How to control a Canon 430ex ii from a YN-622C-TX?

I have a Canon T2i with a 430ex ii and recently bought a radio transmitter kit (YN-622C and YN-622C-TX). The setup works, i.e.the TX on the camera, the 430ex on the 622C transceiver, all on channel 1 ...
1
vote
1answer
44 views

Controlling 4 Yongnuo flashes with a cable?

I am using 4 568EX II flash guns with 4 YN622C wireless flash triggers connected to the guns. I then control all with my YN622C-TX. Can I wire all the flash guns together with a cable and only use ...
1
vote
1answer
100 views

Can I trigger Yongnuo YN-622N and YN-622C together at the same time?

I am a Nikon user and my friend uses Canon. If we use Yongnuo YN-622N & YN-622C can we trigger both the Nikon and Canon flashes at the same time?
0
votes
0answers
33 views

Why is my Yongnuo YN-565 flash not working on my D750? [duplicate]

I got a new D750 and a Yongnuo YN-565 flash. The flash was working fine, then one day just stopped (I had it for maybe a week or two at that point). I tried everything - new batteries, resetting ...
2
votes
0answers
51 views

How do I stack different brand flash controllers on my Canon 5D Mark III and still have full TTL and power control?

I am trying to control two off-camera flashes with my Canon 5D Mark III. The first flash is a Profoto B1. The other flash is a YN600EX-RT speedlight mounted on a Yongnuo YN622C II transceiver unit. ...
0
votes
2answers
39 views

Manual external flash compatibility tests?

I recently bought a YN560 III External flash. However the listing said it was only compatible with older models of Nikon, Canon, Olympus etc. The more I think about this the less it makes sense, ...
0
votes
2answers
74 views

How do I fix a non-charging Yongnuo YN568II flash?

My Yongnuo flash suddenly refuses to charge up. The batteries are good and new (Eneloop). The charge light is dim red when I press the power button and nothing is displayed on the LCD. It never turns ...
1
vote
2answers
39 views

For macro shooting does a YN-560TX have advantages vs. an RF-603 to trigger YN-560IIIs?

I've just purchased my first external flash, the YN560 III. Context: Macro work, Nikon D3200, Sigma 70mm. My subjects are generally fish, and occasionally reptiles. This is to give you an idea of ...
0
votes
4answers
362 views

How can I use only the external flash on slave mode without firing the built-in flash?

I have a Canon 700D and YN-568EX ii external flash that I am using in slave mode. But whenever I try to fire the built-in flash pops up automatically and fires itself. Is there any option to use only ...
0
votes
0answers
65 views

Why is my Yongnuo YN-685 not flashing at all on my 70D in any mode?

My camera is communicating with the flash in ETTL mode, but the flash does not fire at all. Anyone know what can be causing the issue?
1
vote
1answer
78 views

Why won't my YN-560-TX trigger my flashes when on-camera?

I have a Canon 70D, YN-560-TX and two YN-560IV flashes. The YN-560-TX is synced to the flashes and they work when I press the test button on the transmitter, but when I try to fire with the ...
0
votes
0answers
69 views

Why does my YN-568EX underexpose in i-TTL?

I bought a new Yongnuo YN-568EX, and am facing a problem that in iTTL mode, the image underexposures and gets dark no matter the direction of the flash. Can you please help me with this?
1
vote
3answers
221 views

Can I use a Canon 430EXII off-camera with just a Yongnuo YN-622C-TX?

I'm using a Canon 430EX II with a 6D camera. Can I use the flash as a slave with the Yongnuo YN-622C-TX without any transceiver attached to the flash? I'm really looking for the cheapest solution to ...
2
votes
2answers
109 views

Can I control three YN600ex-rt flash units from one controller on the camera?

Just replaced my 600D with 70D canon and I am about to buy four units of the new YN600ex-rt and I wanted to know if I can use one yn600 on camera as master to control another three flashes to fire ...
1
vote
0answers
22 views

yn560tx is not connecting to 560iii flashes

Have anyone ever had a problem with the yn560tx not connecting to the 560iii? It was working at one point of time and the night i used it, it just stopped firing the flashes. I have already tried ...
4
votes
1answer
1k views

Yongnuo YN-685 underexposure issue in bounce mode at longer focal length

I just purchased a new Yongnuo YN685 to replace a trusty but old Canon 580-EX (the original, not the II version) that is misfiring and may be on its last legs. After playing with it for a few ...
0
votes
1answer
38 views

Why I can't control the the amount of light from an off-camera flash with a YN-560-TX transmitter and RF-605c trigger?

I use a Canon 60D and am trying to connect my new YN-560-TX as a transmitter to an RF-605c as a receiver attached to my off-camera flash. It fires the light which confirms that they are connecting, ...
1
vote
2answers
201 views

Why is my YN-560-TX on-camera not triggering my RF-605C and Canon 430EX II?

I bought a Yongnuo RF-605C and Yongnuo YN-560-TX and I can't work with them. I think that there is no connection between them. The flash works properly when I use the triggers off of the camera (Canon ...
1
vote
2answers
250 views

How can I wirelessly control my Canon 580ex II?

I want to add wireless control to my current flash system. I have a Yongnuo 560 (that I'm okay with not using) and a Canon 580exII that I'd really like to keep in the system. I've been using Cactus ...
0
votes
2answers
79 views

What are the tradeoffs between using a transmitter or flash as the master in an off-camera setup?

New here: just a question regarding flash setup. I just bought a Yongnuo YN600EX-RT flash. I would like to have a two off-camera flash setup. So my question is, should I just go ahead and buy two ...
3
votes
2answers
191 views

YN685 AF assist not aligned with focus points — can anything be done?

I just got a Yn685 hoping to be able to focus better in low light. However, the red grid that is projected is WAY out of alignment with my focus points (Canon 6D). Is there anything that can be done ...
0
votes
0answers
70 views

Why does my Yongnuo YN-560 flash in S2 not fire with some ttl master flash?

I just bought a Yongnuo YN-560 IV and tried to trigger it optically while in S2 with my Nissin Di700 in TTL and it won't pop even at lower shutter speeds, (S1 works fine). Tried googling and can't ...
1
vote
1answer
138 views

How can I trigger two different flash groups in consecutive shots using Yongnuo YN560-IVs?

I have two groups of Yongnuo flashes, the YN-560 IV, a YN-560-TX controller, a RF-605C wireless flash trigger transceiver, and a Sony A7R. Group A contains the main light (two or three YN-560 IVs), ...
0
votes
2answers
135 views

How can I fire two independent Yongnuo flashes when I snap a shot?

I currently have a Canon 60D and a Yongnuo YN-560 II Speedlight Flash, but am wanting to fire two flashes on tripods. Can I buy another 560 II to do this and how so? And if I can't then do I need to ...
1
vote
2answers
216 views

Will a Yongnuo YN600 EX-RT trigger a YN565-EX?

Can I trigger a YN565EX using a YN600EX-RT? Most people say that the 565EX has no built-in receiver. But I've read the instructions and there are features to set-up groups (a,b,c) - I think if the ...
1
vote
2answers
83 views

How can I link a Mamiya 7ii with a Yongnuo YN-560III and suitable Yongnuo RF transmitter?

I own a Mamiya 7ii camera and would like to use a flashgun mounted on stand with an umbrella and trigger it from the camera, manual only. Would the Yongnuo YN-560 III and a suitable Yongnuo ...
2
votes
2answers
104 views

Do I need the YN-560-TX flash controller for a Canon T5i and YN-560 II speedlights?

I have a Canon T5i (700D) and want to get two of the YN-560 II speedlights. Do I need to get the YN-560-TX flash controller or can I get the RF-603C transmitters? If they are all the Yongnuo brand, do ...
0
votes
2answers
636 views

Can I use a Yongnuo YN-600EX-RT flash on a Sony Alpha DSLT?

I'm planning to change my kit and move to Sony SLT system (I have special, personal reasons). I currently own the above mentioned flash. I would like to know how I possibly could use it on a Sony SLT ...
0
votes
2answers
508 views

Which studio strobes are compatible with the Yongnuo YN-622C?

I currently have 2 pairs of Yongnuo YN-622C Wireless TTL Flash Triggers for Canon. I'd like to use them to wirelessly trigger studio strobes and I'm wondering if anyone knows the compatibility of the ...
1
vote
2answers
577 views

How do I set up a Yongnuo RF-603 II with a Yongnuo YN-560 III flash?

I'm brand new into the world of photography. I'm a realtor and want to be able to take my own high end photography, but nothing too crazy. I've bought some cheap(er) equipment to help get my foot in ...
0
votes
1answer
50 views

Is the Yongnuo YN622C-TX still “working” when it's turned off?

Today I used a Yongnuo YN622C-TX with a Canon 7D and spotted some strange behavior. When the transmitter was on and I was shooting in A mode, the shutter speed was set to 1/250, as expected. I turned ...
2
votes
1answer
467 views

How to use a Nikon SB-700 in combination with a Yongnuo 560 II and RF-603 triggers?

I'm shooting a D7100 and I have two flashes: an SB-700 and a Yongnuo 560 II. I have two Yongnuo RF-603 wireless triggers. How do I fire these two flashes? Do I need to buy two more triggers or is ...
1
vote
1answer
142 views

What are cheap, compatible receivers for the Yongnuo 622N-TX?

I only have a single flash so buying a pair of 622N for use as receivers seems like a waste. What are some alternative RF receivers? Do I get to keep i-TTL and high-speed sync if I use a non-622N ...
0
votes
0answers
101 views

Is the Phottix Indra 500 compatible with the Yongnuo YN622N-TX controller and triggers?

I own the Yongnuo YN622N-TX controller and triggers. Does anyone know if this controller and trigger fire the Phottix Indra 500 portable studio light? If yes, can I wirelessly adjust the power output ...
1
vote
1answer
104 views

How do I get my Yongnuo YN-560 III to sync off-camera with a 5D Mark II and RF-603 II?

I have a Canon 5D Mark II, and I'm attempting to use a Yongnuo YN-560 III flash off-camera, with a remote trigger. I'm using the camera in Manual mode, with the following settings: ISO 320, f/7.1, 1 ...
2
votes
2answers
155 views

Which Yongnuo trigger, RF-605C (Canon) or RF-605N (Nikon), works on the GH4? [duplicate]

I'm guessing the difference between the two is the pin config and not the hotshoe mounting. Which one do I go for?
0
votes
1answer
434 views

How do I set up my Yongnuo RF-603II trigger and Yongnuo YN-568EX flash? [duplicate]

I have a Nikon D5000 with one Yongnuo RF-603II trigger. How can I use my Yongnuo YN-568EX flash as an external flash? What settings do I use?
1
vote
0answers
129 views

Why are there no blinking red lights in slave mode with one of my Yongnuo flashes?

I recently bought two Yongnuo 568 EX IIs and they're working great! I'm just having one problem in one of the two: when I put the flash in any of the slave modes (Sc, Sn, S1 or S2), the red lights do ...
1
vote
1answer
116 views

Nikon D5100 and Yongnuo RF603N II hot shoe issues

Are there any known issues with using a Yongnuo RF603N II with a Nikon D5100? I am trying to trigger a Yongnuo 560 III with the RF603N II. When I mount the 560 III directly on the D5100, it triggers ...
2
votes
1answer
106 views

Can I trigger a Yongnuo 560 III off-camera flash from Yongnuo RF-603II triggers on two different bodies?

I have two Canon bodies, three flashes, and two RF-603II triggers. I am planning to set the Yongnuo YN-560III as an off-camera flash at an event. The Yongnuo 560 III has its built-in RF-603 receiver. ...
1
vote
0answers
44 views

Why doesn't my YN-565EX fire with the RF-603II wireless triggers?

I can't get the flash to fire with flash triggers on. Can anyone help? Body: Nikon D7000 Flash: Yongnuo YN-565EX Trigger: Yongnuo RF-603II wireless flash trigger
1
vote
1answer
116 views

Are Simpex triggers compatible with Yongnuo flashes?

I would like to know if Simpex triggers work with Yongnuo flashes.
1
vote
2answers
604 views

Why won't my YN-568EXII work with a flash trigger? [duplicate]

I have a Canon 5DMk2 and have just bought 2 Yongnuo YN568EXII speed lights. I have an existing Yongnuo RF-603CII trigger, but I cannot get them to work together! Does anyone have any suggestions, as ...
1
vote
2answers
275 views

How to sync Yongnuo 568 EX ii flash with Nikon and have ETTL and high speed sync?

I know you can signal the flashes with the built in flash on the Nikon D750, but I was wondering if there is any other options, I hate to blind my clients with the built in flash all the time!
-2
votes
1answer
42 views

YN600EX-RT Flash functions [closed]

Where can I locate the basic operation instructions for the Yongnuo Speedlite YN600EX-RT Flash?
2
votes
1answer
49 views

Is there a way to “lock” a YN560 III's power setting?

Is there a way to lock this flash so that the up/down/left/right buttons temporarily don't change the power? I find that I often accidentally hit the down button with my forehead, and would like to ...