I've used AF-D lenses (with screw drive) on my D40 as a manual focus lens that meters, has focus indication etc. However, I want to know if there are modern lenses that are meant for manual focus ...
Will it be a significant drawback to use a Nikkor af 70-300mm f/4-5.6G on an Nikon body without an AF motor?
I am a beginner at the moment and I am planning to buy Nikon D5100 + Nikon Nikkor AF 70-300mm f/4-5.6G, also with the kit lens (18-55mm VR lens). My question is both the camera and this particular ...
Is there any difference between using a full manual lens for Nikon F-mount or using lens for another mount (say m42) with an F-mount adapter?
I'm looking for a very cheap (~$50), fast (large aperture), full manual (non-CPU) lens for my Nikon D7000. After searching on eBay, I found that the same lenses (e.g. Vivitar 135mm f/2.8) are cheaper ...
There are only A and M settings, no A/M. but I just noticed that Nikon website has mentioned three focus modes for this lens: Auto, Manual and Manual/Auto I'm confused if this is only a typo or is it ...
Is it possible to focus manually with Nikon Coolpix P7100? I put my camera on a tripod and tried to make photos of full moon this night, however the camera is unable to find focus on the Moon and all ...
I have a 50mm f/1.2, this lens: http://www.nikonusa.com/Nikon-Products/Product/Camera-Lenses/1435/NIKKOR-50mm-f%252F1.2.html that I got used from a guy I know. When I mounted it in my D7000 though, ...
I am looking into getting a Nikon soon (either a D3100 or a D5100). One of the reasons that I am upgrading from a point and shoot is because I want to have more control over the camera's functions. In ...
I am finding it quite difficult to use my 70-300 Manual focus non-VR lens with D5000. Learnt it from experts that 70-300 non VR lens does not perform well with D5k though the lens mounts on this body! ...
I wanted to get some cheap old lenses to use on my Nikon DX DSLR (D3100). However, Nikon has one of the greatest flange distances of all manufacturers, which means that most lenses I can buy (M42 ...
How to be sure that the scanner (Nikon Coolscan 4000) focuses correctly and if not, how can I manually focus it using Vuescan?
I have a D50 and I would like to use my manual focus lens (a Nikkor 50mm f/1.4 AI) from my analog SLR. It fits on the mount and all seems to be good, but the status on the LED display blinks F - - ...