Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

Does anybody know the exact chip which is built into the iPhone 3GS and iPhone 4? I've done research on the internet already but couldn't found any exact specification.

What I need is the imaging area (width and height) of the cmos chip in mm.

share|improve this question
    
Here's the unit itself (iPhone 4 camera), courtesy of iFixit, googling the serial numbers didn't turn up anything unfortunately guide-images.ifixit.net/igi/BrHQqX5gowUikOGj.huge –  Matt Grum Mar 14 '11 at 11:22
add comment

2 Answers

up vote 12 down vote accepted

The iPhone 4 uses the Omnivision OV5650, and the 3GS uses either the OV3650 or a very similar model.

The 3GS has a 1/4" sensor, which, using the bizarre industry standard, means a sensor diagonal of about 4mm. The OV3650 has an array measuring 3.626mm × 2.709mm, giving a diagonal of about 4.5mm, so that fits the spec. (Presumably some small portion of the edge of the sensor is not used in imaging — see this question). The overall iPhone 3GS sensor area is about 9.8mm².

The iPhone 4 uses the much improved OV5650 sensor module, which is classified as a 1/3.2" sensor, with measurements of 4.592mm × 3.423mm, again presumably not all used. The overall sensor area is about 15.7mm².

Interestingly, the number of photosites per cm² is about the same between the two — the iPhone 4's increase in pixels is just about exactly the same as the increase in sensor area. But the iPhone 4 sensor is constructed differently, using "backside illuminated CMOS", which is probably what accounts for the very dramatic increase in image quality between the two models.

share|improve this answer
    
Perfect answer, thanks! –  brutella Mar 14 '11 at 22:18
add comment

Ok I managed to find some decent info on the iPhone4 camera, which uses an omnivision OV5650 sensor, according to a teardown of the device by chipworks. The sensor area measures 4.592mm x 3.423mm and each photosite is 1.75µm

share|improve this answer
    
The teardown is very helpful. –  brutella Mar 14 '11 at 22:21
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.