Why there is no Canon 50mm *IS* lens?

Question

Canon's 50mm prime lenses are all non-IS (Image Stabilization) for some reason. Considering the popularity of these range primes, shouldn't Canon be interested in shipping a new, optically improved IS version?

Answer 1

There are two main reason why there's little chance we're going to see 50mm IS lens in the near future:

• 50mm lenses tend to be very simple and therefore cheap. Complicating its design with an image stabilizer group would push the price significantly higher, while the added benefit of IS wouldn't be that high at 50mm focal length.

• If you want an expensive and light-hungry 50mm, there's already the huge lump of glass that is EF 50mm f/1.2L. There's not much point in having IS in such fast (and relatively wide) lenses.

Answer 2

It is interesting doing a comparison of fashion shots of models in stidio, with the Canon 24-105mm f4 L and the Canon 50mm 1.4, both at the 50mm focal length, both on a 5D-iii. If the model is still, they are equivalent, with somewhat finer detail in the prime. If the model is moving, the 50mm prime suffers. I can only attribute this to lack of IS in the prime.

As flash sync is limited to 1/200 sec, you sometimes cannot go to higher shutter speeds in the studio to resolve movement in the target.

Answer 3

There are economic arguments for sure (prime lenses tend to be older designs and don't sell in as high volumes as consumer zooms) but here's another way to look at it.

The shutter speed required to prevent camera motion blur is heavily dependant on the focal length. The shutter speed required to prevent subject blur is independent of focal length if the subject fills the same amount of the frame.

For shooting people in a non posed situation I've found that 1/50s is about the limit to avoid motion blur in most cases. The speed you need for shooting people and the speed you need to prevent camera shake are about the same.

Now consider a 50mm lens with a three stop stabilizer that works (going on test results three stops is realistic these days). That takes you to a speed of 1/6s which is going to cause motion blur in a lot of subjects. It's true that sometimes you're not shooting moving subject, but in these cases it's not unreasonable to use a tripod, since you're able to take more time over the shot.

I know some people like to use fast wide lenses with cameras featuring sensor-shift IS, and there are cases where it's useful, however these situations are rare compared to shooting with a telephoto lenses where the speed required to freeze action doesn't prevent camera shake.

Answer 4

Purely economic. Both Canon's and Nikon's kit zooms manage to include stabilisation and still cost almost nothing, so it's not the cost of including the mechanism, it's the cost of redesigning the lens. They'd do it if they thought there was a market, but they don't.

Personally I think they're missing a trick. I'd absolutely love a 35mm or 50mm prime with IS, even if it was f/2 as long as it was sharp wide open. I think we'll have to wait for Sony (ie Konica/Minolta) or maybe Sigma to do it. Nikon and especially Canon are pretty unresponsive to user demand. But if Sigma did it and it sold well, then they might be woken from their slumbers.

Answer 5

It's an interesting idea. But I suppose image stabilization pays off the most on lenses that are slow (F/2.8 is slow-ish by prime standards) or long (100mm or longer) or both. A 50mm prime (which is usually F/2.0 or faster) just isn't a top priority for the IS treatment.

While 50mm primes may be popular among photo enthusiasts, they may still be among the slowest-selling, least frequently revised lenses in a big manufacturer's line-up. Cheap kit zooms are certainly the best-selling lenses Canon or Nikon makes, and so are updated pretty often. Canon's current F/1.4 50mm lens design, on the other hand, is nearly 20 years old (circa 1993).

Answer 6

One of the oldest rules of thumb in photography is the "Sunny 16" rule. Essentially, it says that you can get a proper exposure using 1/(ISO linear rating) as the shutter speed at an aperture of f/16 in bright daylight conditions.

At an ISO setting of 100, then, a midday exposure would be 1/100 s (or, more practically on a film camera, 1/125 s for slides or 1/60 s for reversal films).

Another rule of thumb for th 35mm format is that you can safely hand-hold a camera and get reasonable sharpness at a shutter speed of 1/(focal length of lens) in seconds. Anything from 1/60 s down is in the hand-held range for a 50mm lens on a full/frame camera, and 1/80 s and faster ought to be okay on a crop-sensor camera.

Now, not all pictures are taken at high noon on a sunny day. But ask yourself how many pictures you tend to take with your 50mm lens stopped down to f/16. Unless you keep your camera pegged at the hyperfocal distance for Cartier-Bresson-style "decisive moment" snaps, I'd be willing to bet that most of your small-aperture shots are either landscapes or architectural, in which case a tripod is hardly an annoyance. You probably use the lens opened up to f/8 or wider most of the time. And you've got a further couple of stops of ISO sensitivity to hand before picture noise begins to be noticeable to anyone besides pixel peepers.

What all of this boils down to is that there would be a vanishingly small market for an IS 50mm once the added bulk and expense are taken into account. The only people who would really benefit from IS on a 50 are people like me (I have a chorea not unlike Huntington's disease) and a handful of photojournalists who want to work in available darkness but can't stand grain. Oh, and a few people who have money to spend and can convince themselves that the IS lens must be "better" because it's more expensive and has the letters "IS".

Answer 7

That is a question for Canon. Honestly, I would not expect them to answer anything about their reasons or plans for not doing something.

What you may note is that there are very few prime lenses with stabilization. If you look across ALL major brands, there are only 20 of them among 213!

One would assume the base logic is that prime lenses have wider apertures than zooms and so stabilization is less needed. This is actually one reason I primarily shoot with Pentax and I enjoy using a F/1.8 lens with stabilization for extreme low-light shooting.

There may be a technical answer, but I would just be guessing. Perhaps if you start moving lens elements, you may eat away at some of the quality advantage, or perhaps it is harder to stabilize at wider apertures? I'm curious too but don't really know.