Incense

by Bart Arondson

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I know a few people who carry around a dedicated light meter unit (such as this one by Sekonic) and use that to meter photos instead of using the meter built into their cameras (and these are relatively new mid-range DSLRs).

Is there any good reason why someone would do this?

share|improve this question

6 Answers 6

up vote 25 down vote accepted

Not only are light meters more versatile, you can do a few kinds of metering with them that you can't with cameras (and vice versa).

The meter you've linked (and I happen to own) has two kinds of metering: reflective and incident. Also, light meters can meter for flashes/strobes, something you can't do with modern DSLRs.

Reflective metering in the metering you know from DSLRs; light is reflected off your subject and back into the camera. While this kind of metering has many advantages: you can meter from far away, you take into account the whole scene, etc., it has many pitfalls. A scene with lots of snow or a dark wall can fool it. I'm sure you have a some images that are poorly exposed for no reason, among a series of well exposed images - that's what happens when a reflective meter is fooled.

Incident metering is a bit different; it allows you to measure the light falling onto a subject at the point of that subject. That gives you a "truer" exposure, one where dark material will come out dark and light material will come out white. Sekonic has a pretty good FAQ entry on the subject. When shooting people, you would measure at the subject's face with the dome pointing at your lens, something you often see in movies.

With a modern flash meter, you can also meter flashes and strobes. The meter you linked can either be hooked up to a PC sync cable, or can be set to react to a flash of light. This lets you measure the results of strobes you've set up without using a digital camera or a polaroid. It also lets you check that you have nailed your exposure, without checking your LCD a thousand times.

In addition to measuring the whole scene, with incident metering, you can measure the light from each of your strobes, and if you ever look at strobe notations, that's how they're usually recorded. This you measure at the subject, pointing the white dome at your various lights while firing them off separately. This lets you quickly jot down your flash ratios, and that's extremely useful when recreating a look.

Oh, and the reason I often carry that Sekonic meter around: It's much, much smaller than my DSLR and I use it for my film cameras that don't meter.

share|improve this answer
    
We used that meter in my studio lighting course, it was very useful and easy to use. If you do get a meter, get one that can meter flash. –  gerikson Jan 12 '11 at 18:24
    
Incident metering (with an "i") is definitely the best thing about a dedicated light meter, no more guessing what you're pointing at is mid grey! –  Matt Grum Jan 12 '11 at 19:14
    
Yeah, except "incedent" gives me 11 million results on google vs 1.8 for incident, did my head in a bit. –  Jędrek Kostecki Jan 12 '11 at 19:23
1  
Google results don't mean anything in this case - searching "lense" will give you numerous results, although this is an incorrect form of "lens" (wsu.edu/~brians/errors/lense.html). –  ysap Jan 12 '11 at 19:53
2  
I keep reading "incedent" as "indecent"... –  gerikson Jan 12 '11 at 22:20

Getting the exposure right isn't easy with film, because there's no immediate feedback, so a light meter (intelligently used) is the way to go. With digital, a quick chimp at the histogram and blown highlight warnings, adjust, and you're ready to go. So no, I don't think it's valuable any more. In principle you could work without even a light meter in your camera if your estimation skills were reasonable and you were allowed to chimp once before every keeper.

All this talk of chimps and keepers makes me sound like I work at the zoo.

share|improve this answer
    
Agreed, the histogram, etc, make all the fancy techniques carried over from the film days, completely unnecessary. –  labnut Jan 13 '11 at 12:27
    
1 for the humor haha –  Michael Nielsen Jul 7 '13 at 7:25

Cameras tell you what you they think you want to know. Light meters tell you exactly what you NEED to know to make a great exposure.

The camera's sole decision logic is based on reflectivity of the subject. It can only 'guess' as to how reflective your subject is. Conversely, a handheld meter measures, with impressive accuracy, the light falling on the subject regardless of it's reflectivity.

Hence, the meter is telling you what you "need to know" (actual light) VS guessing.

Even if you are using your handheld meter in a 'reflective' or spot metering mode, you're making the final decision regarding a subject's actual reflectivity.

I've used Sekonic meters for nearly 15 years as a commercial photographer. Best metering device in my book. I don't leave home without a meter, it was the single smartest purchase in helping me diagnose my exposure errors.

Also, one excellent side benefit to using a handheld meter is you will begin to calibrate your eye to the light available in a scene. Soon, you will be able to walk into a scenario and just about nail the exposure without having to meter. Knowing how much light is available to a scene is a first step in getting a great shot. Everything is based on light.

share|improve this answer
1  
@Ofeargall - Welcome to the community. Could you please elaborate on what you mean "want to know" vs "need to know"? –  ysap Jan 12 '11 at 19:49
    
Sure thing. The camera's sole decision logic is based on reflectivity of the subject. It can only 'guess' as to how reflective your subject is. Conversely, a handheld meter measures, with impressive accuracy, the light falling on the subject regardless of it's reflectivity. Even if you are using your handheld meter in a 'reflective' or spot metering mode, you're making the final decision regarding a subject's actual reflectivity. Hence, the meter is telling you what you "need to know" (actual light) VS guessing. –  Ofeargall Jan 12 '11 at 21:37
    
Please forgive my incomplete initial answer to the askers question. Upon reflection (no pun intended) I deserved the -1. I'll be more careful in the future. –  Ofeargall Jan 12 '11 at 21:39
    
@Ofeargall: As ysap said, welcome to the community! Your response to ysap's question added a lot to your original answer. Remember that on photo.se.com you're allowed to edit your answers after the fact (just click the 'edit' link below your answer and go to town)... It would be better to take the response you made in the comments and actually paste it directly into the answer. No shame in updating the answer you made, and you'll likely see a reversal to that -1 in short order. (I'll be sure to send a +1 your way when I have votes again in a few hours) Again, welcome! –  Jay Lance Photography Jan 12 '11 at 22:07
    
Thanks for the warm welcome. I've been a commercial photographer for many years and I hated when people wouldn't help educate me. I'm embarrassed at my incomplete answer because I love for people to learn and enjoy photography more. I just found this 'stack' today. I use stackoverflow extensively for my other work. THanks for the gentle guidance on my post. –  Ofeargall Jan 12 '11 at 22:20

Incident meters tell you about the light falling on the subject.

Reflective meters (like those built into cameras) tell you about the light reflected from the subject.

As you can imagine, reflected light depends on (a) nature of the incident light and (b) reflective properties of your subject.

Since the reflective meter does not know what the subject it, it makes some assumptions about it. These work, most of the time. However, low-contrast dark or bright scenes give reflective meters trouble, because they break the built-in assumptions.

For outdoor (ambient) lighting, an incident meter is not very useful. With your camera's meter and a good understanding of what information it is (or isn't) providing you, you can easily get the exposure you want.

Incident meters are most useful when you are using flash, or a combination of flash and ambient. Some of the more sophisticated ones calculate the ratio of flash-to-ambient to make keyshifting easier.

share|improve this answer

Although in camera light meters are reliable, and getting more so all the time, there is still room in your arsenal for the dedicated light meter.

I find I use mine most often when developing multi-light scenarios, mostly in portraits and real estate shots. The main reason is actually simplicity and speed. Once I settle on composition, I don't want to break it to use my spot meter in camera.

In other words I find it much easier and quicker to settle on DoF, then walk around scene once or twice checking levels on my subject with my dedicated. I can do the math in my head and come back to camera with a better sense of my scene. Then, any micro adjustments I need to do are through camera/master strobe unit. This, I think, works better than firing off a bunch of test flashes while your subject just sits there and you chimp away at the back of your camera.

That, and you look cool doing it too. That said, there's also no reason not to check your histogram before you settle on exposure.

share|improve this answer

The primary reason I can think of is to use it when scouting a location. You may not want to lug around all your gear initially, but you want to have a good idea of the ambient light.

This also would apply when you are doing a lot of lighting work, and you want to check the light levels as you go.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.