What is the exposure triangle? How do the "sides" affect my photographs?
"The Exposure Triangle" is a catchy phrase meant to encompass the three factors which affect the exposure of a photograph of a scene with a given amount of light. It's often given to new photographers as a learning aid. I'm not sure if he invented it, but it is certainly popularized by Bryan Peterson, as in his book Understanding Exposure. (The popular web site Steve's Digicams gives Peterson credit for the term, as do other authors.)
The three factors are:
Each factor is interchangeable in terms of exposure, so that a decrease or increase in one factor must be met by the same amount of change in another. (More on this below!) And each has intrinsic secondary effects on your composition — longer and shorter shutter speeds freeze or blur motion, smaller apertures give more depth of focus, and generally higher ISO causes more noise as one attempts to get more signal out of less light.
The problem with the phrase "exposure triangle" is that the relationship between these three factors does not actually share any of the properties of a triangle other than "threeness". That makes it a bad analogy, which can introduce more confusion than necessary, as new photographers attempt to reason from the information they've learned.
Let's say we have a triangle where the sides (or corners — it doesn't matter) represent a shutter speed of ¹/₆₀th, aperture of f/11, and ISO 100. We draw a triangle, and we label that "Properly Exposed for EV 13". (See the Wikipedia article on EV for where the value "13" comes from). So far, so good — we've got our triangle.
Now, what if we want to change the shutter speed to ¹⁄₃₀th, and the aperture to f/16? That should give the same exposure. But what happens to our triangle? Do we double the size of one line, and halve the other? Or is there some other relationship that's meaningful?
It doesn't take much mucking about with a pencil and paper to determine that, no, this just breaks down. If you attach any actual meaning to the dimensions of the sides or the angles of the corners, not only is there no relationship to the area or size of the triangle, many settings yield impossible triangles even though they're perfectly valid exposure settings.
An alternate approach would be to leave the triangle's geometry constant, and put labels along the sides. This is somewhat more useful for thinking about the non-exposure effects of the parameters, but fails on actually showing anything about exposure. (And worse, may cause confusion by implying a linkage between the factors where they come together at the corners — how does bokeh connect with motion blur?)
Basically, it'd be just as useful to say The Exposure Clover, or The Exposure Tricycle, or the The Exposure Set of Juggling Balls. Or the Exposure Branches of the U.S. Government, although that may be harder to draw in an intro-to-photography book. I humbly submit the following illustration for anyone's use; I'll leave the other suggestions as an exercise.
(But I'm not ending with unhelpful sarcasm, I promise. Keep reading below.)
I'm joking, but I'm also serious: there's nothing particularly useful about the triangle for explaining these factors, and in fact it might be detrimental. So, we might as well use something funny, if the only point is to be memorable and associated with the number three.
Or, we could use a better representation: The Exposure Cuboid — a rectangular box. That sounds nerdier and not nearly as catchy, but it has the advantage of actually being useful. Each dimension — width, length, height — corresponds to one of the exposure factors, and the volume of the box corresponds to the the exposure.
This works out exactly right. Each of the three settings can be adjusted independently, and a doubling of any of them doubles the overall exposure — or cutting one in half cuts the overall exposure by half. This is just the same way that changing the length of one of the sides of a box changes its volume. So, we get both a visual analogy and an accurate mathematical representation.
And it's nice from a simplicity point of view, because we can start by leaving off one of the dimensions. If one were using this as a tool to actually explain exposure, we'd start with shutter speed and aperture alone — that's a (plain old regular two-dimensional) rectangle. The Exposure Rectangle still isn't quite as catchy as triangle, but at least everyone knows what a rectangle is, too.
Take some graph paper, and mark off shutter speeds along one side. Start at, say, ¹⁄₂₅₀th at the first mark, then double that time to ¹⁄₁₂₅th at the second mark, and then ¹⁄₆₀th at the fourth mark, and ¹⁄₃₀th at the eighth, ¹⁄₁₅th at the sixteenth, and so on. Actual doubling of time is directly represented by actual doubling of space. We'll get to the concept of "stops" in a bit. (And you'll notice that the number sequence I'm using isn't exactly doubling — for whatever analog-days reason, this is the standard sequence and it isn't exactly precise. That's another chapter, really — at this point, just consider it rounded-off and close enough.)
Along the other axis, we'll mark apertures. Start at the first mark with something small, like f/22. Then, follow the standard sequence of aperture values from there, again making sure to double for each rather than just marking each square — so, f/16 at the second mark, f/11 at the fourth, f/8 at the eighth, f/5.6 at the sixteenth, and so on.
Now, you can directly visualize the effect of increasing or decreasing one of the factors. The exposure of the scene is the area. Any combination of aperture and shutter speed which gives a rectangle of the same area will give the same exposure. Doubling the shutter speed actually doubles the exposure, just as one would expect.
If you draw a rectangle with one corner at the origin and going out to ¹/₆₀th and f/11, with the labels as above, you get a 4×4 rectangle — area 16. (Here, the actual number 16 is just an artifact of how we decided to start our labeling and the size of the squares — the actual number is meaningless.) Change to ¹⁄₃₀th and f/16, and it's 8×2, or ¹⁄₁₂₅th and f/8 for 2×8 — either way, still the same area.
And adding in the third factor, ISO, is simply extending this to the third dimension. This is harder to draw on paper or put in a book, but once you have the idea of the rectangle down, it's not a far leap conceptually. Imagine an ISO axis extending upward out from your page, labeled similarly to the others. The exposure value becomes the volume of the cuboid, and pretty much everything works the same way.
Another convenience is that shutter-priority or aperture-priority modes can be visualized as flat rectangles within the 3D box. Turn it so whatever two values are adjustable are conveniently aligned.
But a problem with this is that the paper — or cuboid — gets big pretty quickly. And those big areas get cumbersome to work with. That's where the concept of "stops" comes in. Rather than working with linear labels and area, we can work in a logarithmic space based on powers of two. That might sound intimidating, but it simply means that we count the number of doublings, rather than using the direct numbers. Again, sounds like I'm using too many big words, but the great thing is that counting is easy. In fact, you don't even have to count — every modern camera has a meter which "weighs" these things automatically and tells you how many stops you are off. Just like a balance scale.
That loses out on the concept of "threeness" entirely, and it feels a bit unnatural to add things to darken exposure. Someone spending a lot of time thinking about which direction is up isn't really learning the important part. It also doesn't cover flash duration properly. And I sure did end up putting way too much explanatory text there. That's problematic for an introductory diagram (although I'm sure with some work it could be cleaner).
Anyway, the point is: it's catchy to say "triangle", and since there's three factors, it seems obviously true, garnering automatic nods from people who are familiar with the concepts already. And for many people it's pretty harmless. However, there's a more useful geometric explanation which can actually be used to show how the factors really relate. The cuboid may feel like jumping in the deep end, but the rectangle shouldn't be too intimidating, and going on to the third dimension is a natural progression in the lesson.
If that seems too complicated, why bother with a geometric analogy at all? I know that in the last few years it's become a common idea and Peterson's books are very popular. I know many people even find it helpful. I'm not really on a Quixotic crusade to make sure every use of "the exposure triangle" is actively stomped out — but I do recommend against introducing it to new users. Putting the three factors in a bullet-point list works just fine, and doesn't add any inadvertent confusion. Or you can stick with the tricycle.
The exposure triangle refers to the three major settings that effect exposure:
Digital Photography School has an excellent write up about this, but I will summarize as best as I can.
As the name suggests, each element effects image exposure, or how bright/dark the image is. Pick a side of the triangle, increase its value (aperture is special--a larger aperture corresponds to a smaller F-number), while holding the other sides constant, and the image will get lighter.
So for example you have an ISO of 100, Shutter Speed of 1/250s, and Aperture of F2.8, simply increasing the ISO to 200 will double the amount of light in the image. Likewise increasing the shutter speed to 1/125s, while holding other values constant, will again double the amount of available light in the image.
Now while, each of these three settings give you an independent control (the sides are not explicitly linked) of how much light goes into your image, each has a secondary use, often used for the artistic purpose of the photo.
As shown in the image:
ISO controls how sensitive the sensor/film is, which in turn effects how much noise/grain is in the image. For films, you could control the amount of grain in the image, usually for artistic effect. In modern digital camera's, ISO controls the amount of sensor noise comes from the camera sensor. While film grain was desirable in some situations, sensor noise is almost never desirable. So often photographers will pick the absolute lowest ISO setting they can get away with maintaining enough light to effectively shoot their images. The lower the ISO value, the less sensitive the sensore is, the more light required, and the less noise that is expected.
Aperture controls how large the lens opening is, allowing more or less light to come in, while also controlling the depth of field. The depth of field refers to the distance behind and in front of the focal point that is in focus. A shallow depth of field will "blur" out the background. This effect is often used for portraits to put more emphasis on the subject. The larger the aperture, the more light gets used, the shallower the depth of field.
Shutter speed controls how long the camera's shutters are open, again allow more or less light to come in, while controlling motion. A fast shutter speed effectively stops motion. This is useful for action shots, like sports. A slow shutter speed lets motion blur, many times used for artistic effect, such as blurring flowing water.
I've found various versions of "exposure triangles" in the web, and also here on this site, but if I see it well, they all just show a qualitative relation between ISO, shutter speed and aperture to the related "secondary effects" noise, motion blur and defocus blur/diffraction. But the most important parameter LIGHT simply is disregarded. Of course it is true, 4 parameters are too many for a triangle, but here is my try:
Imagine you print this colored large triangle on a thick cardboard:
Then you print these 2 images, preferrably on transparent film, and cut out all the triangles (they are just examples):
Now imagine you measured the light of the scene and you found e.g. sunshine with EV15. Place the transparent EV15 triangle on the cardboard diagram and align it with the edges for ISO, shutter speed and aperture. Wherever you place it (as long as camera and lens allow such settings) you will get the same exposure. So this is actually a quantitative exposure triangle, that can tell you the exact relation between the 3 (or 4) parameters of exposure. But with the little colored triangles it also shows the qualitative differences in noise, motion blur and defocus blur/diffraction, just like all the other exposure triangles do.
What do you think? Can this be helpful? And please excuse my english, I'm not used to writing in english about photography in a forum. Should I replace the wording anywhere?
Best regards and thanks in advance, Matthias
While the other answers explain the concept of exposure triangle quite well, exposure triangle has the downside that it gives impression you only have three variables to control exposure - shutter speed, aperture and ISO sensitivity. Actually there is fourth variable that works similarly in the system - illumination of the scene.
By doubling illumination, any of the other three variables can be reduced by one stop; and by halving illumination, any of the other variables needs to be raised one stop. It also works in opposite direction - e.g. increasing ISO by one stop allows halving illumination.
Relationship between shutter time and flash exposure is a bit quirky since flash illumination is not linear in time:
Illumination can be increased by
and reduced by doing the opposite -
Some light sources are not under photographer's control, but their behavior can be somewhat anticipated (such as sunlight or streetlights).
Photography means "writing with light". Exposure triangle gives the impression that you may not bring your own pen.
Given all the excellent answers so far, I'd just add that whoever came out with this metaphor, probably had a bad (but catchy) selection of words, and what he meant to say is "the exposure tripod" - i.e., "the three legs of exposure". He did not intend to imply a relationship (dependency) between the 3 variables, but merely to name the parameters affecting the exposure.
I've seen several illustrations and comments as to whether they do or not convey the relationship between the three parameters: ISO, shutter speed and aperture. Please allow me to point you to the illustration on my article on exposure triangle. Once you have seen the illustration, think of it the exposure triangle this way:
If you pull one of the angles of the triangle further from the center (thus increasing its value) then it will automatically, in turn pull one or both of the other angles (thus decreasing its/their value). While the exact math is not necessarily respected, the conceptual visualization is there.
EXPOSURE Refers to the amount of light in the photo. Too much light results in over-exposure. Too little light results in under-exposure Exposure is directly related to Shutter Speed & Aperture.
SHUTTER SPEED Controls the amount of time the shutter remains open. Is used in conjunction with Aperture to control light. It is measured in Seconds and can be used to freeze frame elements within a shot and also be used to create the illusion of movement
APERTURE Controls the amount of Light entering the lens and is used with the Shutter to determine exposure. It is Measured in F Stops and works the same way as the iris in the human eye used to shape light. Determines Depth Of Field ( DOF ). The bigger the Aperture (the Lower the Fstop) the shallower the depth of field. This is irrespective of the shutter speed as long as the subject is correctly exposed. Low Fstops give a nice blurry Background (Bokeh) when shooting portraits. High Fstops are excellent for Landscapes where you want everything in focus.
Both shutter and aperture determine exposure. Fast Shutter will freeze the subject. Slow Shutter will allow you to capture movement. Aperture must be set according to aperture value. Over Exposure = too much light. Under Exposure = not enough light. Shooting modes are pre-programmed settings to allow you to shoot in different conditions.
Its is worth using Shutter Priority/Aperture Priority Modes on your camera
ISO SETTINGS ISO Refers to the cameras overall sensitivity to light. The higher the setting the more sensitive the sensor is to light. Eg; ISO 100 IS Less sensitive to light than ISO 400. In the days of film photography it was known as film speed. Lower ISO settings are used in bright light. Higher settings are used in dark areas.
Although there are already a couple of great answers here, let me provide my own take at the exposure triangle. This one is intended to be both genuinely triangular (meaning that it is triangular in a deeper sense than just having some “threeness”) and mathematically accurate as a representation of the exposure equation.
The quantitative exposure triangle
Since this triangle only works for one specific exposure, I have arbitrarily chosen to draw it for LV4 (i.e. BV ≈ −1 in APEX parlance, or reading 9 on the yellow scale of the Lunasix 3):
Here is how it works: each point inside the triangle represents a combination of aperture, ISO and shutter speed. The specific combination can be read by following the colored lines and reaching the scales with the matching colors. For example, the yellow dot is (1/30 s, f/2.8, ISO 1600). All the points inside the triangle provide the same exposure.
This diagram is intended to illustrate the trade-offs one makes when choosing exposure parameters, brought by the fact that changing one parameter at constant exposure implies a needed change in at least a second parameter.
Example: Let’s say we took a properly exposed image with the camera settings at the yellow dot, but we find this image somewhat too noisy. We want to re-shoot it after moving the settings one stop towards the “clean” side of the ISO scale, at the line labeled ISO 800. Then, we can either:
Obviously we could also take any path in between, and end with an unlabeled combination such as (1/20 s, f/2.5).
There is just one weakness in this representation: the fact that the orientation of the axes is not obvious at first sight. For example, the f-number increases faster when going straight up, whereas the aperture scale is drawn, for convenience, along the tilted left edge of the triangle. The implication is that, while it should be clear that the label “all in focus!” belongs to the top corner, it may be less obvious that the label “bokeh!” belongs to the whole bottom edge (along the red line for f/1.4), not just the bottom-left corner.
Another limitation is that this triangle is only valid for one specific exposure. Then, in principle, one would need a whole collection of such triangles, one for each possible exposure. I do not see this as a real problem though, because the triangle is intended more as a learning aid than as a computing aid:
Although the whole idea of this diagram came to me by looking at ternary plots, I also drew some inspiration from previous answers. The labels on my plot are shamelessly borrowed from mattdm’s “The Exposure Triangle, Take 2” (awesome answer, but he got the aperture scale backwards). Actually, my triangle is intended to fit as “The Exposure Triangle, Take 3” in mattdm’s logic progression. And then I borrowed the colored grid from Matthias’ answer.
Besides the direct inspiration, this answer also bears a close mathematical relationship with those two previous answers:
I wonder if I am the first person to come up with this. It would be weird, as it seems so obvious in retrospect. I did an image search for “exposure triangle”: there are tons of them but, with the sole exception of Matthias’ diagram, none of those I found is quantitatively meaningful, although quite a few are almost there, only lacking the grid. I may then claim myself the inventor of this triangle. Please, tell me if you have seen it before, so that I do not embarrass myself for too long with such a claim.
protected by John Cavan♦ May 8 '14 at 18:21
Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.
Would you like to answer one of these unanswered questions instead?