Serene Life

by garik

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I find that taking pictures where the subject is in motion (people, pets, toy helicopters) I get a blur where there is movement.

On the other hand I see images of a drop of water in free fall in perfect clarity.

How fast does the shutter need to be to capture action in motion with perfect crisp clarity?

For example I want to catch a dog shaking himself dry after a swim and not get a bury mess but to see the hairs flying and water frozen in the air as it flies off the dogs fur and makes a giant mist around the dog.

share|improve this question

4 Answers 4

up vote 19 down vote accepted

While you can get some freezing with speeds around 1/300 (see the first photo below), I would recommend going with faster shutter speeds if you want to take shots of water drops falling or moving away from wet dogs.

One thing to keep in mind is that most flashes have a limit on their sync speed, which means that the use of flash will limit your fastest shutter time available.

  • Example 1: 1/320 speed, no flash:

Gold Deliverer | Entregando o ouro

(as you see there's still blur on the water and a flash, even if able to reach the dog, wouldn't make much a difference if it wasn't able to go faster than 1/320)

  • Example 2: 1/1300 s, using the internal flash of a Panasonic FZ18 and the ambient kitchen light:

Tabula Rasa 2

Here a smaller aperture and the ambient light allowed for a slight slower speed, but the shot is sharp enough for me.

  • Example 3: 1/1600 s, using the internal flash of a Panasonic FZ18, no ambient light (shot in the dark):

Signs Of Movement | Sinais de movimento

Here the speed was enough to freeze the drop and the flash was set stronger enough to provide the needed reflections on the background (since there was no ambient light).

Finally, if you are into capturing water drops don't miss John Cavan's very good post on the subject - Catching the Elusive Water Drop

share|improve this answer
5  
+1 though, in your last example, shutter speed doesn't mean much, it's the light that freezes the subject. I do water drop macros all the time using a 1 second shutter speed in a dark setting and the flash is what freezes the drop (usually between 1/16th and 1/64th power). –  John Cavan Dec 29 '10 at 19:28
    
Interesting point, never thought that way. Will do the test next time, thanks for the heads up! :o) –  André Carregal Dec 29 '10 at 20:00
3  
It's fun to do, there's a write up on my website on the technique I use: grumpyjohns.com/index.php/2010/catching_the_elusive_water_drop though I've started using my radio triggers rather than pressing the test button on the flash now, more reliable that way (I use off-camera flash for this). –  John Cavan Dec 29 '10 at 20:31
    
Very nice post indeed, added the reference to the answer itself. Thanks a lot! –  André Carregal Dec 29 '10 at 20:46
    
@André Carregal - You're quite welcome. –  John Cavan Dec 29 '10 at 21:22

It depends on what you're trying to get exactly, but in general, around 1/500 to 1/1000 is about the right amount, unless it's something really fast. Flash also works really cool for this kind of stuff, as the flash occurs completely in a single instant.

share|improve this answer
2  
Flash does not occur in a single instant. Its duration varies between 1/10000 and 1/1000 sec, depending on power. –  che Dec 29 '10 at 17:58
    
Okay, sure, but that's a short enough time where it doesn't matter a whole lot... –  PearsonArtPhoto Dec 29 '10 at 17:58
1  
Not entirely. When dealing with subjects such as water splash macro work, you want the shortest light burst you can get to freeze the motion as longer light bursts will actually result in seeing motion blur in the subject. –  John Cavan Dec 29 '10 at 19:30

That depends on how fast the object is moving, and how far away it is. From that you can calculate how fast it's image is moving across the film/sensor plane.

It all comes down to having a shutter speed that is so fast that the image of the object doesn't have time to move across too many picture elements (film grains or sensor pixels).

So, for objects at a distance you can get away with a shutter time like 1/100 s., while a closeup might need a shutter time like 1/1000 s.

share|improve this answer
    
In the last paragraph, are you assuming that the focal length doesn't change? It seems to me that two shots where the subject is the same size (i.e. further away but longer focal length) would require the same shutter speed to freeze motion. –  Evan Krall Dec 29 '10 at 19:03
    
@Evan Krall: Good point. Yes, what I mean is how the object appears in the image, so the focal length of the lens would affect what shutter speed you need. –  Guffa Dec 29 '10 at 23:18
    
+1 for providing quantitative, rather than mere qualitative guidance, and for recognizing that speed of the image on the sensor is what matters. –  whuber Dec 31 '10 at 15:51
    
Google shutter speed calculator and you'll get for example this calculator - needs some scrolling down the page to find it. –  Esa Paulasto Apr 1 '13 at 8:40

It depends on the speed of the object you are photographing.

The distance the object has moved from the time your shutter opens and closes will determine the amount of blur.

So if the object has moved a good distance while the shutter was open it will look quite blurry.

You want the shutter speed to be fast enough so that by the time it opens and closes the object on motion has actually moved so little it appears to be still.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.