Alley in Pisa, Italy

by Lars Kotthoff

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have a D50 and I would like to use my manual focus lens (a Nikkor 50mm f/1.4 AI) from my analog SLR. It fits on the mount and all seems to be good, but the status on the LED display blinks F - - and the view also blinks F - -. When I try to press the shoot button, nothing happens. I have heard that Nikons will allow for these lenses to work. How does it work?

share|improve this question
add comment

3 Answers 3

up vote 8 down vote accepted

The "F--" indicates that the lens isn't set to its maximum aperture, or that the camera can't control the aperture directly, which is necessary for most automatic exposure.

To make this work, you'll need to do use manual mode (M), and you'll need to change the aperture using the aperture ring on the camera.

Metering won't work, the solution there is to use the histogram to judge the correct exposure.

I believe that focus confirmation will also not work, and the solution there is to do your best, and use higher apertures (f/5.6 or higher). Shooting at f/1.4 will likely be quite difficult to do reliably - it can be difficult on cameras built for manual focus; if you want to try, a good solution is to focus as best you can, then move slightly forward (maybe 5-10cm), and take several pictures, moving backwards a small amount (2cm) each time.

share|improve this answer
    
This is the right answer. I had to learn this with an older 50-300mm f/4.5 I borrowed from a friend. Now that was a lens that was as long as my forearm... –  mmr Jul 24 '10 at 7:17
add comment

There is a Nikon SLR Camera and Lens Compatibility chart at nikonians.org that probably can answer your question. It depends a bit on what lens it is.

share|improve this answer
add comment

That's curious...I use the old 105mm 2.8 Micro on my D50 without any trouble, certainly not like you've mentioned. For what it's worth!

The D50 should be able to handle most any compatible lens, except possibly rather old or eclectic ones.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.