Time passes by

by clabacchio

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I am kind of newbie in photography, but I trully love learning more about this. I am looking for a way to make StopMotion video - but this is really a photography question.

So, I am looking for a way to:

  1. Shoot 1st photograph
  2. When I prepare second, I could see 1st with alpha/opacity to correctly fit things
  3. This actually need to work in all photos and need to be in live view (just simple shoot 2 photos and fit them in photoshop took too much time)


    Some kind of this:

enter image description here

For now I have 3 cameras: Canon 1100D, Canon 600D and Canon 60D - so I actually think that is possible at least in 60D - could be a Canon firmware or even a computer (OSX/Win) software.

Thanks in advance :)

share|improve this question

2 Answers 2

up vote 7 down vote accepted

As far as I know there are two possible solutions. I will explain both of them below.

EOS utility

This software is supplied with your camera. It can be downloaded from the internet, but it's a hassle. It's better if you install it from the CD and update it. When you have it on your computer do the following:

  1. Connect your camera through USB.
  2. Start EOS utility.
  3. Go to Camera settings/Remote shooting.
  4. Click on Live view shoot.
  5. Click on Compose and enable the overlay image.
  6. You can adjust the position, scaling and transparency of the overlay.

Now you can just shoot using Live view while seeing the overlay image. Depending on the settings of EOS utility the photos are stored on your camera or computer (or both). This blog post has some screenshots.

Magic Lantern firmware

Magic Lantern is custom firmware for a range of Canon cameras. Both the 60D and 600D are supported. It adds a range of fantastic features like focus peaking, a built-in intervalometer, dual-iso, audio-triggered shooting and (useful for you) in-camera overlay images. While it is "hacked" firmware, it is never installed on your camera and always runs from the SD card. If you don't like Magic Lantern, just format the SD card and the camera will just use the built-in firmware.

Once you've installed ML on your camera(s) you can add an overlay image as follows:

  1. Make sure the image to overlay is on your camera.
  2. Bring up the ML menu by pushing the Erase button on your camera while in shooting mode.
  3. You'll most probably start in the Audio menu. Use the arrow keys to go to the Overlay menu.
  4. Set Global Draw to anything but Disabled
  5. Enable the Ghost Image.
  6. Go to the Play mode, find the overlay image and press the Live view button.
  7. You can move the overlay with the arrow keys.

I'm not taking any responsibility if your camera breaks when using ML, nor do the developers. However, I have been using the firmware non-stop for the past two years withouth any problem.

share|improve this answer
    
This is what I was looking for: 1) A software to use live view mode on computer AND 2) a firmware with no risks and even better than built-in Canon firmware. Thanks a lot! –  fiskolin Mar 14 at 11:43

The unofficial firmware extension magic lantern has this feature.

There you can select an arbitrary Image that you have taken with this camera on the sd card in playback mode and overlay it in live-view mode.

share
locked by John Cavan Aug 17 at 3:36

This post has been locked due to the high amount of off-topic comments generated. For extended discussions, please use chat.

    
More specifically, it's been locked because it has become a massive spam target with 13 attempts in the last day to edit to a spam post. –  John Cavan Aug 17 at 3:38

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.