Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo

Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

This is more of an equipment recommendation question than a technical one. I am concerned that the extension may degrade the image quality. I guess my question is two fold.

How do extension tubes work?

Can a good quality extension tube degrade the image quality?

share|improve this question
add comment

4 Answers

up vote 8 down vote accepted

An extension tube, regardless of brand, does not degrade image quality since it has no lens.

As the name suggests, it is just a tube with no glass in it. (Those with glass are called tele-extenders and have a totally different purpose.)

The difference between brands are connectivity and build quality.


For some third party extension tubes, the lack of the electrical connection means auto focus will not work. Also, since the lens is not connected to the camera, you can't change it's aperture (unless it has an aperture ring).

However even with a high quality extension tube, your camera auto focus will fail 90% of the time anyway, since the DOF is very shallow. So you will almost certainly be manual focusing even with an expensive extension tube.

Build Quality

If your camera body is heavy and your lens is heavy, it only makes sense to use a high quality tube, well-constructed in metal that can take the full weight and ensure the stability and safety of your lens and camera. Some cheap extensive tubes are constructed with thin plastic and may come loose or even snap if you put a heavy load on it. If you are just using a kit lens then it makes little difference. If you are using a heavy and expensive lens then it is worth getting a tube that will not put your expensive gears at risk. After all a lens could cost $800 and a high quality extension tube will only cost $100 or so.


As pointed out by Matt below, it actually does (slightly) affect the image quality. This is due to the small mis-alignment of the lens with the body. It should be rather hard to notice but it is present. Please read his answer for details.

share|improve this answer
Lens adapters also contain no glass, but do degrade image quality. Therefore I suspect that extension tubes do as well, although maybe not by much. If nothing else, Roger isn't going to be able to test them on his optical bench and focus at infinity... –  Philip Kendall Oct 1 '13 at 13:34
Perhaps from a bad inner linning of black non-reflective material? I can imagine if the inner side of the tube is coated silver it would be a huge problem, surely no such silly things exist? perhaps? lol –  Gapton Oct 1 '13 at 13:45
More for the same reason that high-quality adapters degrade quality: because they produce a misalignment between the camera and the lens. –  Philip Kendall Oct 1 '13 at 14:32
add comment

Extension tubes work by moving a lens further from the film or sensor.

The closer an object is to the lens, the further back the focussed image will appear, hence extension tubes allow you to focus on objects closer to the lens than would be possible otherwise. They are commonly used a cheap way to improve the macro abilities of a lens.

There are a few ways image quality could be compromised

  • Floating elements. Some lenses include a "floating" element (just a lens that moves independently of the focussing group) in order to reduce aberrations when focussing close up. If you set the lens focus to a distant setting and then use extension tubes to obtain close focus then you wont be getting the benefit of the floating element and image quality can suffer.

  • Misalignment of the lens. A certain amount of misalignment is inevitable though most cases it will not have a noticeable impact on image quality. In extreme cases this could manifest itself in a tilt in the plane of focus, e.g. the right side of the image might be in focus but the left side out of focus.

  • Light leakage or flare (unlikely unless the tube is very badly made, though possible for a DIY effort).

share|improve this answer
Image quality is a function of the object distance too though. It is impossible to create a lens that will map any one point (the object) into a single point (image). It's possible to design a lens which maps one particular object point into a perfect image point, but it's impossible to create one which maps all object points into perfect image points instead of smudges. (Think about mirrors: for objects at infinity you need a parabolic one, for closer objects you need an elliptic one.) So theoretically if a lens is optimized for objects beyond a certain distance, it may ... –  Szabolcs Oct 1 '13 at 23:50
... not have the same performance for closer objects. This much is clear from physics and geometry. Whether this does have a tangible effect in practice, when one uses an extension tube to allow focusing on objects closer than the lens was designed for, I do not know. The effect may be negligible. I do have a subjective feeling that one telephoto lens I use does not perform as well close to the minimum focusing distance as for distant objects, but that's just a subjective observation that I have never tried to test rigorously. –  Szabolcs Oct 1 '13 at 23:52
@Matt learned something new, thanks!! –  Gapton Oct 5 '13 at 3:51
add comment

There is no difference in IQ between different extension tubes directly. There is no glass, the quality loss comes from the change in focusing distance which can lead to an impact on sharpness and focal distance characteristics of the lens.

The only way I can think of that the quality might be impacted is that the camera might no less about what is going on and have a harder time adjusting, so automatic modes might be impacted, but generally manual is suggested for working with extension tubes anyway, in which case the impact would be uniform.

share|improve this answer
add comment

In addition to image quality issues related to misalignment or poor manufacturing (light leakage or reflections), there is another potential source of image degradation when using extension tubes: the flaws in the lens attached to the tube will be magnified.

By moving the lens further from the image plane, the tube has the effect of magnifying the center part of the image circle cast by the lens to cover the entire sensor instead of just covering the central portion of the sensor. Any optical defects in the original lens that involve the center of the image circle will be spread over the entire sensor and will be easier to see when the image is viewed.

share|improve this answer
add comment

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.