Recently I purchased an Andbon dry cabinet of 155L but it didn't come with a manual. So, I am having problem understanding the controls. I cannot figure out what the no. signifies on the lcd when its is in ideal mode. When I am pressing the temperature button is showing the temperature and it is also showing the relative humidity when pressing the check humidity button.
I am not sure if this helps!!
I have purchased the 68L which provides a digital read-out of the RH% and Temperature. There are three control buttons UP DOWN and SET.
When I press the UP button (temp check) it will indicate the temperature in deg C and at the same time switch the LEDs inside the chambers. If I press the UP button again the LEDs switch OFF.
When I press the DOWN button (humidity check) it will indicate the current RH% in the chamber.
When I press the SET button, I can actually set the minimum RH% I need inside the chamber with the UP or DOWN buttons.
I have checked the digital readout and the RH% appears to be accurate but the temperature is not quite accurate.
However, I am not very happy with this dry cabinet as it keeps switching ON and OFF very quickly to set the correct RH%.
I also have a WONDERFUL [https://www.google.lk/search?q=wonderful+dry+cabinet+ad-040c&client=firefox-a&hs=DoG&rls=org.mozilla:en-US:official&tbm=isch&tbo=u&source=univ&sa=X&ei=etkeUrXvKqOCiQff0ICQDg&ved=0CDgQsAQ&biw=1453&bih=763] dry cabinet which has a fairly accurate RH% reading and I prefer this model as it does not come ON and OFF so regularly. The principal of drying method is better and more economical.
I store camera equipment inside both dry cabinets and I have set the RH to 45%