Open

by damned truths

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I recently returned to using a DSLR after several years of just using a point-and-shoot. I would like to get a home printer that's good enough that, when I'm not satisfied with the photo, I can rule out the printer and concentrate on the 101 other variables that contribute to photo quality. I'm a bit overwhelmed right now and just want to find some systematic way to start improving my work. I kind of broke the bank buying this gorgeous Nikon D5200 and a couple of good lenses. I already had a Mac and Photoshop CS6. Is there any relatively inexpensive printer that has both good inks and a straight paper feed? Don't laugh, but, say $300 or less? The photos don't have to be archival and don't have to be larger than 8.5x11 (though it would be nice if they were). I don't care about bells and whistles like wifi or in-printer photo fixing. It doesn't have to be a multifunction printer. I mostly want something that's good enough to experiment and learn on. I suppose for the occasionally really special photo I could have it done professionally somewhere. Thanks very much for any suggestions.

share|improve this question
    
Oh, and PS -- you guys were great when I was shopping for a telephoto lens. –  Amanda Jul 10 '13 at 4:10
    
Have you considered printing done by a shop? Isn't that going to be cheaper? –  Unapiedra Jul 11 '13 at 11:13
    
Unapiedra, good point, but I am also trying to learn Photoshop + to be as self sufficient as possible. May have bitten off more than I can chew, we'll see, but still exploring it for now. And by the way, thanks everybody -- not sure what the etiquette is here but I'm not marking any one answer as "accepted" because they're all very helpful. –  Amanda Jul 12 '13 at 14:28

3 Answers 3

This printer is not $300 or less considering the original price tag, but it comes with a $200 rebate, and up to $300 rebate when buying photo paper. And since you are trying to find a deal I think this could be appropriate as an answer.

Canon PIXMA PRO 100 printer @ Adorama for $389 with a mail in rebate of up to $300 depending on what else you buy.

Pixma Pro 100 @ adorama

The best deal in my opinion and for someone looking for a printer is to buy the Pro Luster photo paper (9"x13") 50x sheets for $69.99.

Pro Luster paper @ adorama

Read the rebate carefully first, for instance everything must be purchased from Adorama.

The printer is rather large (which is a good thing) and I imagine the shipping alone would be at least $50, but Adorama has free standard shipping to make the deal even more sweet.

Pair this printer with high quality paper like the Canon Pro Luster and learn a thing or two in the fantastic How do I generate high quality prints with an ink jet printer? and you could really go above and beyond the level you were hoping to achieve.

share|improve this answer
1  
It is worth adding that said rebate is also available from a few other online retailers other than just Adorama, but they all have pretty much the exact same price so it doesn't particularly matter which you choose. You do need to make sure that whatever retailer you look at has the rebate offer though. I'm pretty sure B&H does. –  AJ Henderson Jul 10 '13 at 13:21

I'd recommend either the PIXMA Pro 100 that DavyCrockett mentioned or if you want something cheaper and don't mind being limited to 4x6, one of the Canon Selphy die-sub printers will give really nice quality and a fixed cost per print of around 25 cents.

For the cost, the Selphy is the best bang for your buck, though if you use good papers, the Pixma will do a better job, particularly if you calibrate it, but also will cost more (the paper alone for a similar 4x6 will run you more than the $.25 for the Selphy print, even without ink which is typically similar in cost to the paper.)

I personally was using a Selphy as my primary photo printer until I upgraded to a PIXMA Pro 1 (which is the big, big brother of the Pro 100, but I seriously considered the Pro100 as well). I'd also suggest that before you pick up a Pro100 if that's what you think you want, check out TryMyPhoto where you can give Canon a photo and they will send you a print from the Pro 100.

share|improve this answer

Today just about any printer is good enough, even my cheap office fax/scanner/printer combo has pigment-based "ink" and prints amazing photos if you feed it high quality photo paper.

An actual photo printer like the PIXMA is better than a random printer designed for office use, obviously, but I believe normal people (that is, not photographer or people who work in print) wouldn't be able to tell the difference.

Don't laugh but I recommend you just go into a large office supply store and ask for the cheapest inkjet that has a strait paper path and pigment based ink, I wouldn't suggest this for professionals or for producing museum pieces but it's good enough for learning and you can spend the money you save somewhere else (like a screen and printer calibration device or ink and paper).

By the way, while I do think just about any modern junk inkjet in good enough you do need high quality ink and paper - use only original ink and only good photo paper, also, don't forget to set your printer quality setting to high quality photo.

share|improve this answer
    
I don't know about printers in the last couple years, but the difference is very noticeable in greys and blacks for my few year old multifunction. The paper gets over-saturated trying to produce detail in dark portions of the image and it becomes pure black. For photo printing, I'd recommend something with a grey cartridge at a minimum and if it is pigment based, it also really needs a red cartridge since red is more subdued in pigment inks. –  AJ Henderson Jul 10 '13 at 13:25

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.